Using single 2x40 LCD with MBSEQv2

MIDIbox SEQ
1

According to the hardware option for MBSEQv2, when using a single 2x40 LCD:

http://www.ucapps.de/midibox_seq/mbseq_lcd_2x40.gif

“only 4 steps are visible on screen (compressed without spaces, visible beat selected by last changed value)”

What does “visible beat selected by last changed value” means. Just a little confused..

docbrown..

2

For the 2x40 LCD option, you will read “only 8 steps are visible on screen (visible beats selected by last changed value).”

This means: you will either see step 1-8, or 9-16. The application will switch to the right page when you turn an encoder or press one of the 16 general purpose buttons.

Please note, that the 1 * 2x40 LCD option won’t work with MBSEQ V3, only 2 * 2x40 will be supported!

Best Regards, Thorsten.

3

TK,

Thanks for the explanation. I’m sorry for my silly questions. :-[ I’m sure some newbies out there might have ask the same thing. :slight_smile:

Thanks for being patient about my questions.

docbrown..