Damn it! i was to finish my first PCB project in Eagle and now i’m having a dumb error!
I can’t add parts to the board anymore, something is wrong with one pad but nothing is connected to the pad. I don’t know what to do to fix it !
If someone can help me i’ll send you both files.
Pins/Pads with different connections:
Part Gate Pin Net Pad Signal
IC1 9 N$18
ERROR: Board and schematic are not consistent!
Just zip them and attach them to your post.
if you are working with a schematic, it’s important to make changes to the nets there rather than on the pcb. you must have edited the pcb with the sch closed or vis versa. if so, make a backup of the files , open the pcb, close the schematic (it will automatically load) and try deleting the suspect part on the pcb with the sch closed…
if you are working with a schematic, it’s important to make changes to the nets there rather than on the pcb. you must have edited the pcb with the sch closed or vis versa. if so, make a backup of the files , open the pcb, close the schematic (it will automatically load) and try deleting the suspect part on the pcb with the sch closed…
Fixed. Many thanks bugfight!!