kokoon
September 19, 2005, 8:15pm
1
;D
i’m starting this thread cause i’m finding it very painfull to find.
what i was looking for were either soft-touch (rubber-finish) knobs or shiny aluminium knobs. BUT! both without indicator!
desired diameter somewhere between 10 and 15mm
so - what i found so far:
mentor knobs (reichelt carries them - not sure if all of them though)
511.61
http://www.mentor-bauelemente.de/db/k/510.41.html
538.62
http://www.mentor-bauelemente.de/db/k/538.62.html
(hmm it look like this one is “security knob” - it has to be pushed down first)
5571.6100
http://www.mentor-bauelemente.de/db/k/5571.6100.html
505.61
http://www.mentor-bauelemente.de/db/k/504.41.html
332.6
http://www.mentor-bauelemente.de/db/k/332.4.html
531.603
http://www.mentor-bauelemente.de/db/k/531.3.html
5571.6006
http://www.mentor-bauelemente.de/db/k/5571.6006.html
all of the above knobs are available in “no indicator” 6mm shaft variant.
bring on some more!
kokoon
September 19, 2005, 8:33pm
2
more from OKW
A3116069 + A3216007 + A7516000
also (from http://www.okw.co.uk/products/okw/comb-knobs.htm ):
A2513068
together with
A4113002
and
A7513008
would make a beautiful combo! could also be black/red/any color!
kokoon
September 19, 2005, 8:59pm
3
pay_c
September 22, 2005, 1:57pm
4
albs has a whole bunch of knobs also: www.albs.de
But be warned: Although the knobs themselves are pretty fair-priced, the minimum order starts @ 60.- Euros for private, they won´t give you anything if you land below that. Fortunately they also got ALPS Pots/Faders/Encoders etc. I do not know if they ship to countries outside Germany, but anyhow, just ask them.
Here are *some* of their products - more on the page
They also got a good variety of fader knobs!
kokoon
September 23, 2005, 12:02am
5
hmmm anyone knows if soft-touch knobs WITHOUT a mark even exist? doesn’t look very good so far…
pay_c
September 23, 2005, 6:45am
6
I am not sure if albs has those (as they produce theirselves, the chances are pretty good) - what about an email to info@albs.de ?
illogik
September 23, 2005, 9:25am
7
yo kokoon;
check the knobs tk used for the seq. i got those to0; no (unrealistic) minimum order i thougght, there from albs
cheers, marcel
hmmm anyone knows if soft-touch knobs WITHOUT a mark even exist? doesn’t look very good so far…
http://www.elma.de/files/products/rotary_components/pdfs/new_soft_touch_and_classic_knobs_001.pdf
Greets, Roger
iamlark
September 23, 2005, 7:09pm
9
kokoon
September 24, 2005, 4:48pm
10
WOW!!! that’s awesome!!! any idea what store sells them?
I just bought 200 pcs. from them directly a while ago. To prevent any trouble, I ordered them over the studio I’m working for. - I have no idea about they’re selling parts to private people.
Greets, Roger
BTW: Those are standart http://www.sifam.com/ -knobs
kokoon
September 25, 2005, 8:29am
12
how much did you pay for 200 knobs?
how much did you pay for 200 knobs?
I took the “hard-touch” type
CHF 128.- (Swiss Francs, incl. Tax)
Greets, Roger
