Midio128 initialization issue

Design Concepts
1

Hi,

just a short question on the behaviour of the Midio128 after bootup. I have my DINs configured as @Toggle with te inverted inputs enabled (default setting).

What I want is that the first click on a button will set the bit to “on”, send a NOTEON message and light the LED connected to the corresponding DOUT, obviously the second click should turn it off again.

Problem: After starting up the first click will send a NOTEOFF message and not light the LED, only the second click will produce the “on” event. After that it behaves normally. But I cannot go and click all buttons once before it behaves usefully.

Is this behaviour by design? Can I do something with the settings in the sysex to make it behave as I wish?

Any help is appreciated

Greetings

Reiner

2

Hi Reiner,

I remember that an early release of MIDIO128 had this problem, it should be fixed with v2.1 - if not, then please send me your .ini file

Best Regards, Thorsten.

3

just a note for anyone else having this problem. Thorsten has put up version 2.1b which solves the problem.

Many thanks!

Reiner