midibox seq v2 (vintage) bankstick problem

MIDIbox SEQ
1

hi midiboxers

 

I know this is an ooooold project, but i just buildt a midi box seq v2 vintage with potentiometers and everything works perfect except the bankstick for SONGS, the paterns one works perfect but the second one for songs don´t, I buildt a board with ID0 for the paterns and ID1 for songs I¨ve tryed with ID7 and the same problem, is it correct? or the songs memory goes on another ID. I think this question is more for old midiboxers or even TK

thank you

 

 

2

Hi,

by default it’s assumed that a 64k EEPROM (24LC512) is used - in this case patterns and songs are stored into the same BankStick

If you are using 32k 24LC256 instead, it will be required to change the CS number in the setup_mbseq_v2.asm file, and to rebuild the .hex file

Best Regards, Thorsten.

3

Thank you very much for the help and this wonderfull project