MB-6582 modulation matrix problem

MIDIbox SID
1

Hello all,

I am testing an MB-6582 with a home brew control surface.

The problem I have is with the mod matrix. When selecting a source and target the leds work correctly as does the actual routing. The problem is that the target is not updated in the LCD. It stays with —. The source is updated though as is the actual routing and led behaviour. So I’m confused.

Any ideas?

Cheers

Al

2

hi,

thats the expected behaviour. the displayed target is an additional destination for the routing path, such as LFO depth/rate, CV, MODs, etc…

They can be optionally selected with the rotary encoder.

best regards, thorsten.

3

Oh, doh!