CV and Gate/Trigger/ Setup - AOUT port no dual gates out

MIDIbox SEQ
, ,
1

Lately I’ve been trying to use the extra functions of the CV-Gate out, specifically the possibility to send velocity with key values.

From the manual:

Quote

Note 9 Key Value -> CV Out #1, Velocity -> CV Out #2, Gate #1 and #2 triggered

Note 10 Key Value -> CV Out #3, Velocity -> CV Out #4, Gate #3 and #4 triggered

etc, etc, etc

 

http://discourse.midibox.org/t/topic/19295

 

 

2

Helo! Same problem, Wilba front panel two, last update but that’s work well like that :

Note 9 Key Value -> CV Out #1, Velocity -> CV Out #2, Gate #1 triggered    

Note 10 Key Value -> CV Out #3, Velocity -> CV Out #4, Gate #2 triggered

Note 11 Key Value -> CV Out #5, Velocity -> CV Out #6, Gate #3 triggered  

Note 12 Key Value -> CV Out #7, Velocity -> CV Out #8, Gate #4 triggered  

3

This was a translation error in the code, it’s fixed now (and enhanced by a new feature! :slight_smile:

http://www.ucapps.de/mios32/midibox_seq_v4_095_pre12.zip

o AOUT: Channel 9..12/13..15 now set the gate pins #1/3/5/7 as documented (previously it was #1/2/3/4 due to a code translation error)
     New: gate pins #2/4/6/8 are now set whenever the velocity is >100.
     This way the pins can be used as an accent trigger

Best Regards, Thorsten.