salut n°2 pcb - n°16 10k SIL RN - n°4 220 Ohm DIL RN
merci d’avance
salut n°2 pcb - n°16 10k SIL RN - n°4 220 Ohm DIL RN
merci d’avance
Hi Raoul.
Can you fill the Wiki page?
If you have problem to do so, email me.
Regards.
Bonjour Raoul.
Pourrais-tu remplir la page Wiki?
Si tu as un probleme pour le faire, email moi (voir mon profil).
Cordialement.
4 more PCBs added to the wiki page.
Nice design.
upgrading to 8 boards, as
* i am an illumination wh*re 
* this will be the maximum amount of boards natively supported by the new MIDIbox NG (two SRIO chains with 16x2 shift registers each)
* maybe we can reach 150 boards and get a 50 cents rebate per board
* you have gotta love the design - thanks Jérôme
Many greets,
Peter
Thanks Peter.
…I think I must update ASAP the shipping cost table.
Regards.
Is it possible to make a bulk order for the encoders too? :whistle:
I let someone else doing a bulk order for encoders (…severals models, prices and weight to manage).
Sorry 
Regards.
Anywho, I guess we could find some interesting solution. Like ordering a boatload of encoders straight from the manufacturer in China using Alibaba if there’s a good amount of interest.
I think that a global Midibox bulk order will be pertinent regarding number of projects using them.
I asked Alibaba but their price is not interesting except for a very low quality clone.
I asked also to a French Bourns distributor but they did not answer me (not professional? very few units?).
An idea would be to contact another national distributor but the asked quote should be far more than 1000 units (5000? 10000?).
Regards.
Shipping cost table updated.
Regards.
Regarding an encoder bulk, I fear that not soo much can be gained…
Example… when someone does a bulk of 1000 bourns encoders with switch, the mouser price will be 652€.
If then 32 (20,86€) are sent to a person somewhere in the EU (they are too heavy for normal envelopes), ca 10€ p&p have to be added, so that the “normal” price of a mouser order (which is 30.08€ for 32 pieces) is matched.
So, in short, when you order via mouser and can reach the 65€ free-shipping amount (and chances are that you will, because of the encoders and the LEDs and other MIDIbox small parts), you will be fine…
137 boards on order! Yeaah! Only 13 to go for the next price drop 
(and only 5 more for the “breakeven” point, where it makes sense to order 150 instead of 142, because they will be cheaper :))
Many greets,
Peter
Dear members.
Can you send me by mail (jeromebo at free dot fr)your:
Username
Paypal mail address
Real name
Postal address
Country
Level of shipping insurance you want to take.
Best regards,
Jerome.
what’s up? still in time?
gonna add myself to that list later… i don’t ‘need’ it now but who knows?
still in time?
Yes you are, the list ends the November 23th 2012.
I think you have forgotten to record the wikipage because it is locked. Can you check it?
Thank you.
Regards.
Email sent.
J-3
Can these be cut vertically so I can configure a 2 (2x4) for a 4x4 config?
EDIT: nvm, they can’t…
Put me down anyway lol
Put me down anyway lol
That you’ll need to do yourself: look at the first message in this thread and follow the instructions closely.
Can these be cut vertically so I can configure a 2 (2x4) for a 4x4 config?
EDIT: nvm, they can’t…
Put me down anyway lol
Hi Dreadknot.
No effectively this board is not breakable. But you can use only a part of the controllers of the board (it is like this I plan to use them).
Maybe one day I will make a 4x2 or 8x1 control surface (more possible today with the double chain handled by the Midibox NG).
If you want to order you have to create a Wiki account and upgrade the Wiki page list.
Regards.
[Edit: Sorry ilmenator for the double answer, you react more quickly than me 
]
Hi Dreadknot.
No effectively this board is not breakable. But you can use only a part of the controllers of the board (it is like this I plan to use them).
Maybe one day I will make a 4x2 or 8x1 control surface (more possible today with the double chain handled by the Midibox NG).
If you want to order you have to create a Wiki account and upgrade the Wiki page list.
Regards.
[Edit: Sorry ilmenator for the double answer, you react more quickly than me
Done!!
Ok.
We have reached 150 units so the new price is 8,50€ each board.
Regards.