Control surface PCB for 16 encoders/LEDrings Bulk Order

Bulk Orders
21

Wondering if these boards could be used for pots with different multi/demultiplexors? Also hoping to bring down the pcb price with excessive orders!

No, these boards are made for (endless) rotary encoders. Analog pots require different boards (and different software).

22

Really great design! Finally a simple & newbie-friendly solution which will be useful for many projects! :slight_smile:

I will definitely support it in the upcoming MIDIbox NG, and also in MIDIbox CV V2

While writing this I noticed that I actually need three PCBs - one for MBCV2, and two others for MBNG because 16 encoders wonā€™t be enough for my usecase - I added myself to the list and of course I will pay for the PCBs! :slight_smile:

Best Regards, Thorsten.

23

I will definitely support it [ā€¦] in MIDIbox CV V2

w00t! I was so hoping for this! :w00t:

24

Iā€™m getting in too deep, but what the hell, thatā€™s the vortex of Midibox slowly sucking me in. Put myself down for two.

Thanks!

25

Thanks for you work, I take 3.

26

3 for me too please. Donā€™t know what Iā€™m going to do with them yet, but Iā€™ll think of something!

Thanks,

Kevin

27

Iā€™m in for 2!

Thanks

28

50 up, very nice looking boards :slight_smile:

29

Peeps, help our esteemed PCB creator out by adding yourselves to the Wiki list mentioned in the first post, plus make sure that you have a proper registration on this forum as well! The registration for the Wiki is different than that of this forum, help creating traceability!

Also, if youā€™re new here, got few posts etc it might be a good thing to introduce yourself in a relevant thread or say hi to establish some level of trust

Not bad, the number of PCBs already exceeds 50!

30

Hi everybody.

Note that the new price is now 11Ć¢ā€šĀ¬ each PCB (+ shipping).

Regards.

31

Hi everybody.

Note that the new price is now 11Ć¢ā€šĀ¬ each PCB (+ shipping).

Regards.

and this is a good new too :smiley:

32

and this is a good new too :smiley:

And another good one when weā€™ll hit 100 units.

33

Hi,

Can you put me up for two?

I will find proper user for them, Iā€™m sure!

Regards,

RenƃĀ©

34

Price down! Excellent, that means more pcbs for me! This way we could all get more for cheaper!

35

Hi,

Can you put me up for two?

I will find proper user for them, Iā€™m sure!

Regards,

RenƩ

Peeps, help our esteemed PCB creator out by _ adding yourselves to the Wiki list mentioned in the first post _, plus make sure that you have a proper registration on this forum as well! The registration for the Wiki is different than that of this forum, help creating traceability!

Yes, the emphasis is mine, as is the quoted text.

36

Hey jojjelito, I started a thread at Mutable since I couldnā€™t find your post, though I did see it. Would love to see this get to over a 100 pcbs for another price break.

Also, think we should consider a bulk order from Mouser or otherwise US side for encoders to get a big price break. Regular breaks are around 10,25,50,100 pieces and the price can drop significantly in those numbers.

Also started a thread at monome.org to advertise this.

37

Yes, the emphasis is mine, as is the quoted text.

Hi,

I tried to add myself on the list in the wiki page, but was not able to do so.

The file is lockedā€¦

38

@Prosperity, make sure to create a wiki account otherwise you wonā€™t be able to edit the page. It isnā€™t the same account as here.

39

Hi,

I tried to add myself on the list in the wiki page, but was not able to do so.

The file is lockedā€¦

Hi!

Sorry if I sounded harsh - I just wanted to save JĆ©rĆ“me some work. Before you can edit the Wiki you need to register yourself there. Itā€™s a separate system from the forum, so registration is doubleā€¦ Anyway, scroll all the way down and press Login. Now you can press the Register link and get that done. Then, after logging in you can easily have your way with the list (and other pages) on the Wiki. Or, someone else is having a twirl with the Wiki page so try laterā€¦

Cheers!

40

Also, think we should consider a bulk order from Mouser or otherwise US side for encoders to get a big price break. Regular breaks are around 10,25,50,100 pieces and the price can drop significantly in those numbers.

I was near to propose it in this bulk order but too many parameters to manage in only one session.

Also started a thread at monome.org to advertise this.

Thank you for your marketing.

Hi,

I tried to add myself on the list in the wiki page, but was not able to do so.

The file is lockedā€¦

Mea Culpa, I was fighting with my table on the wiki page:

ā€¦The shipping cost table is now updated.

Sorry, you can retry now Prosperity.

Regards.