bad burned pic?

Testing/Troubleshooting
1

hi, tanks to read this topic.

I tink have problems with the MBHP burner, because test passed ok, but at least of process i got “1 error in config”?

if all program process have passed like that:

Chip erased

4 Panel(e)

Start write to PROGRAM-Memory

–finished

Start write ID

–finished

compare PROGRAM, ID and EEPROM :

–>0 errors in PROGRAM

–>0 errors in ID

–>0 errors in EEPROM

Start write Configuration

–finished

compare CONFIG :

–>1 errors in CONFIG

i tried to upload mios on mios studio: mios_v1_9f_pic18f452 and pass but continue sending request every 2 sec. its normal?

i tink can be damaged pic… but i don´t make nothing.

also i cannot blank check pic, so many errors:

PIC-Typ PIC18F452 Rev. 7 detected

CP-Blocksize : 2000

Panelgröße : 2000

Chip erased

Blank-Check :

24162 errors in FLASH

8 errors in ID

223 errors in EEPROM

4 errors in CONFIG

it had code protection? how to fix it? please helpme.

2

here are come again, i progrese with info, its because pic got code protection, but i can´t erase fully, anywayi will try a little more, tanks to read post.