Wrong layout MBHP_DOUT_MTC

Design Concepts
1

Hello Thorsten,

while planning (layouting) my (next) MIDIbox LC I recognized a error in the layout of the MBHP_DOUT_MTC.

Both files, mbhp_dout_mtc_v1.brd and .gif contains it.

The error: The 220 resistors which have to be connected to pin 15 of the two 74HC595 are routed to +5V.

I tried to correct it. But I’m not practised in EAGLE at all !! (I use other layout software). So can you please check the two connections I’ve changed and place the correct layouts in ucapps ?

Heres the changed file:

http://www.systemhaus-schneider.de/doc/mbhp_dout_mtc_v1a.brd

Thanks and greetings.

DOC

2

Thanks Doc,

this layout has been made by Marfurt Cyrill, I will inform him about the error and upload your file instead.

Note: the LED digit extension for MBLC is in beta state now, I’m not able to test it, so I’m waiting for input from D2k, who will try it out.

Schematic:

http://www.ucapps.de/midibox_lc/midibox_lc_leddigits.pdf

Best Regards, Thorsten.

3

Thank you Thorsten for the pdf.

Before posting my ‘changed’ layout could you please ‘inspect’ the changed tracks. I wasn’t able to get them “round”. (As mentioned before…I’m a EAGLE dummy  :P)

Thank you

Doc