Album by Wilba
Gallery category: members-gallery
sammichSID Base PCB
sammichSID Control Surface PCB
sammichSID paint-filled engraving test
Testing a method of paint-filling the engraving on matte black acrylic. Laser cuts through the sticky backing paper on the acrylic, which is left on while painting. Multiple coats of thinned white acrylic paint, excess is wiped with damp sponge to avoid backing paper sticking to the paint in the engraving. Looks a little messy with flecks of paint - these can be removed later when it’s cured.
sammichSID #001
No longer a prototype… this shows the new matte black acrylic case with DIY paint-filled engraving.
Quick hand-held photo… better shots to come soon.
sammichSID #001
No longer a prototype… this shows the new matte black acrylic case with DIY paint-filled engraving.
Quick hand-held photo… better shots to come soon.
sammichSID #001 (green LCD/LEDs)
Very hard to take a good photo of this nice true green LCD… but it looks something like this:
kaffe
Cherry MX with extra contacts for velocity sensing
Made with two pins of a female header and a cut sliver from the gold plated disc inside a 12x12mm tactile switch.
Frog on MB-6582
Yo Mr. Braska
sammichSID #001 (Arctic Ice remix)
sammichSID #001 (Arctic Ice remix)
Cherry Jammer Prototype
sammichSID #001 (Borg remix)
Resistance is futile.
sammichFM
kaffeSEQ
Prototype case fit test. Will wrap this
sammichFM enamel paint fill demo
sammichFM enamel paint fill demo
sammichFM prototype fit test
sammichFM prototype fit test
kaffeSEQ enamel paint fill demo
sammichFM prototype
sammichFM prototype
sammichFM prototype
sammichFM prototype
sammichFM prototype
Re’an P401 and P675 knobs
you can haz sammich!
/topic/15501-sammichfm?do=embed" frameborder=“0” data-embedcontent=“”>
sammichFM
/topic/15501-sammichfm?do=embed" frameborder=“0” data-embedcontent=“”>
