What's next?I have to upload Mios?

Testing/Troubleshooting
1

Hi.

I’ve bought all parts at Mike’s Shop and already put all things together but … there is some problem.

I’m testing connection with computer and i can see (using the MIOS studio)

00000000713225 ms | Sysex message: F0 00 00 7E 40 00 01 F7

00000000715117 ms | Sysex message: F0 00 00 7E 40 00 01 F7

00000000717009 ms | Sysex message: F0 00 00 7E 40 00 01 F7

00000000718902 ms | Sysex message: F0 00 00 7E 40 00 01 F7

00000000720794 ms | Sysex message: F0 00 00 7E 40 00 01 F7

00000000722686 ms | Sysex message: F0 00 00 7E 40 00 01 F7

00000000724578 ms | Sysex message: F0 00 00 7E 40 00 01 F7

00000000726470 ms | Sysex message: F0 00 00 7E 40 00 01 F7

00000000728363 ms | Sysex message: F0 00 00 7E 40 00 01 F7

00000000730255 ms | Sysex message: F0 00 00 7E 40 00 01 F7

00000000732147 ms | Sysex message: F0 00 00 7E 40 00 01 F7

…

Nothing else , even if i will push one mouned button in teh DINX

I’m testing this with one DINX connected to CORE . In DINX i’ve istalled only one button.

In what is the problem ?

PIC have been programmed in shop so i think that’s not the point i think…

Or meaby i have to upload a Mios ?

If i have to Core’s in my project i have to upload the Mios to them at once ?

I will be gratefull if you will told me whati have to do , as soon as possible.

Best regards

John Hetmond

2

Welcome aboard John

http://www.midibox.org/dokuwiki/doku.php?id=mios You’ve just got the bootloader on there at the moment. Check out that page and have a search around these forums as well and you’ll be all set :slight_smile:

3

Thanks !

I’ve already upload “update_without_installed_mios.hex” and now everything is fine i think…

But when i press the button in the connected DINX module - there is no signal found by teh MIOS Studio or Ableton…

What more i have to do to see that my Core is sending signals when i move pots or push the buttons?

I’ve read this forum and uccaps and i can’t find the answer .

4

Read some more mate :slight_smile: Don’t be discouraged, there’s a lot to take in!

You’ve bought the PIC with the bootloader burned on it, and you’ve uploaded the operating system (MIOS), but not an application :slight_smile:

What application did you plan on using?

5

oh! that’s the way it goes !

I thought that i will be everything programmed ready to work that’s why i thought it’s all after step with MIOS.

And i really thank you for telling me what is what = ] . Sometimes everybody needs a little push to move!

Thanks once again !

6

Anytime dude, hope it works OK! Don’t forget to send us all some pics and show off when you’re done heheheh