I built a small, cheap and easy to build guitar tuner around a PIC16F84A-04P:
In case someone is interested, it’s documented here: http://schickt.de/index.php?entry=entry080606-004307
Have fun,
nILS
Wicked man.
That’s awesome!
Can you do me a 6 channel version, for divided pickup use?
only kidding.
Can you do me a 6 channel version, for divided pickup use?
Hihi, um, not likely with the current hardware as the code space is ~95% full 
But it should be rather interesting to make a little PCB that simply cleans up and squares the guitar input and hook it up to a mbhpCore - more code mem and way more processing power ;D
Looks nice! But, okay, I get the point Freddy ;D I’ll put together an update with BIG pads and make a little more room everywhere so it’s a bit more DIY-friendly. I never tested the PCB as I use a perfboard version for now. I’ll keep you guys posted!
hi
this brings back the same old problem of the different pads/trace size for diy etching or industry grade pcb.
My little-big “dream” would be to create a set of libraries and eagle setup so that you could easily change a “normal” .brd into a diy customized version.
Simone
Thanks Nils i ll build one, sometime..
…with BIG pads…
aha! told ya so…
also: bug… upside down… funny!
-bugflip
I’ve modded the most common libs already to have big/small pads, so changing the footprints for that board shouldn’t really be much work. The idea of having a “midibox” library has been tossed around a lot too - maybe someone needs to get started with it 
Does anyone here tune their guitar or other stringed instrument with an oscilloscope?
Does anyone here tune their guitar or other stringed instrument with an oscilloscope?
Not yet.
In any event, the waveform made by a guitar might be a bit tricky for oscilloscope tuning.
How would you do it? with a dual trace, and a reference pitch?
that’s better where’s the pdf? need to redo some of my boards anyway, don’t ask why.
THe pdf will be up after I doube checked everything Prolly this evening.
nILS, that is awesome, how well does it work??
I’ll be adding that to my list of things to do for sure!
I’ve only tried it with two guitars (les paul copy with humbuckers and fender strat) and it works really well so far. Only problem is the low e-String of the les paul - as the lower strings have a lot more noise and overtones than the higher ones. I’m still tweaking the cap and resistor values for the low-pass filter a bit. It does work, and using a flageolett on the 12th fret of the low e-String “solves” the problem.
using a flageolett on the 12th fret of the low e-String “solves” the problem.
Workaround != “Solution” (even with the quotes) ;D
LOL
would it be worthwhile adding a high pass as well, to get rid of all sorts of ick, like mains hum, handling noise etc.
Also, maybe filtering out the fundamental and tuning to the harmonic would be better??
“solution” == workaround
Apparently there’s a lot of (better) alternatives. But most likely not any cheaper/simpler ones. And that was really the focus of that project. It works well and if you’re lucky you can get all the parts for ~6EUR.
you have to make it work without workarounds on the les paul fossi!!! otherwise I won’t build it 