Here are some pics of my Burner build.
Congrats, that thing looks sturdy ;D
I’m not sure I wanna see a gut-shot though 
Okay will make one…
So for all who wants to see the inside here we go…GUT PICS. ;D
Pic nr 1 is the back of the pic socket. I’ve separated this part so the socket is on the outside. Quit some fiddling that was.
This is a picture from the pcb. As you can see i’ve made connections to run on battery’s or a PSU.
Top right you can see a red and black wire for the battery’s and two blue ones for the psu.
Some more pictures…
To do like i did…with the separate pic socket, just run the wires that come from IC 2 & 3 to the pic socket including a ground wire.
The LPT cable i soldered directly to the pcb…for all who are going to re use an old cable do a beep test on the wires with your multimeter…it saves a lot of headaches. One wire wrong and the bloody thing won’t work.
A question about the burner…is it also possible to make an adaptor for 8 DIP pic’s? I want to burn some 12F675/629…and which program can i use for burning these small ones?