Would the dual-gang version of
http://uk.rs-online.com/web/search/searchBrowseAction.html?method=getProduct&R=0387824#header
be suitable as feedback pots for the MB-6582?
Or if not, anyone know of an alternative UK supplier of a product that would do the job? I’ve trawled around a little, but haven’t found anything yet from my usual suppliers.
a|x
20.4mm body diameter… does not suit the default rear panel holes.
The easy guide for you, if you don’t have a rear panel yet, those pots are aligned with the sockets.
What about this one?
Hi strophlex,
I think that one has a linear response, whereas I think I need a logarithmic one.
a|x
On the feedback pots linear/alorithmic doesn’t really matter.
On the feedback pots linear/alorithmic doesn’t really matter.
Ah, OK. I can get hold of 470k dual-gang linear pots relatively easily from UK suppliers. What exact part did you use, Wilba, and from which supplier, if you don’t mind me asking?
a|x
On the feedback pots linear/alorithmic doesn’t really matter.
Given that it’s a feedback loop the response is exponential so a linear pot will give you finer control though. Either will work.
I use 500K dual-gang linear pots, from local electronics shop.
I think anything in the range 100K-1M would be OK. It’s being used as a voltage divider so it doesn’t really matter too much what the value is, but obviously you don’t want to put too much load on the audio outputs or you won’t get any audio going out the sockets. So MINIMUM 100K. Use smaller ohm at your own risk.
Ah,thanks Wilba. I had assumed log because they’re being used as audio level pots.
I think I should be able to get hold of 470k linear quite easily.
Cheers,
a|x
I’m so far failing to find anything suitable. It looks like what I need are miniature ones, as the panel holes are 7.5mm in diameter, but I haven’t been able to find any suppliers in the UK who sell dual/gang pots in this size and resistance. Any UK MB6582 builders out there who have managed to source some?
a|x
Yeah i found em on Ebay easily
Resonable price too
Really, Flexinoodle? I didn’t have any luck on eBay. What did you search for?
a|x
Maybe i’m wrong and they are not the ones you want
They where cheap and cheerful so i got em LOL
It seems the price has gone up a little though 
Maybe i’m wrong and they are not the ones you want
They where cheap and cheerful so i got em LOL
It seems the price has gone up a little though
Did these work for you?
a|x
I’ll tell you in a couple of weeks
Got some stuff on at the minute that is above the 6582 in the list but when i know i will let you know 
Cheers
Great, cheers.
a|x
I figured the ones from Maplin (the 470k linear ones) are fine for me, but then I’m bodging my whole thing into an old C64 case and I want the knobs on the front panel, along with a patched in delay pedal 