I’m selling my MIDIBox MIDI / DAW Controller.
This unit was a remote control for a Tascam HD recorder in it’s former life. I exchanged the ‚brain‘ to a MIDIBox Core so it could ‚talk‘ MIDI. It’s based on MB-NG.
Inside the unit are (in addition to the original Tascam boards) a LPC17 Core and a custom PCB with all the DIN/DOUTs. I also added wooden side panels and a LRE 8x2 for 16 encoders.
Since it’s based on MIDIBox the unit is fully customizable. At the moment it’s configured as a mixture between a logic control and a ‚normal‘ MIDI controller: the transport buttons, jog wheel and num buttons are in logic control mode (recognized by your DAW as a logic control), the rest of the buttons, encoders + LEDs are sending/receiving MIDI CCs / Note messages.
16x encoders with LED rings
1x jog-wheel (optical)
9x big transport buttons
66x small buttons
137x LEDs
1x 7-seg-display (3 characters)
1x 2x20 LCD
2x MIDI-In
2x MIDI-Out
1x USB (4x virtual ports)
1x Ethernet (OSC)
1x Power
It’s powered by USB, but you can also connect an external power supply in case your computer / hub is too weak.
I’m asking 180,- Euros / or maybe a swap for an iPad / iPad mini (iOS 11 ready).
Lars
