can someone tell me how to map incomming midi events to led’s on the dout module.?? (in applications like the midibox64 and 64e)
the tutorials and walk-thru’s touch on this, but dont go into detail.
an example of my proble is this:
on my transport controls, i assign a button to send an event to cubase, and cubase echos the event back out ( presumably to the led), so that when you press play on the midibox, and then stop with the mouse inside cubase, everything still jives…
HI
You can use a command USER_MPROC_NotifyFoundEvent - for catch incoming midi message and attach it for :
MIOS_DOUT_PinSet1 -FOR LIGHT ON LED , and
MIOS_DOUT_PinSet0 -FOR LIGHT OFF .
It is a key for a heven 
Hi,
the LED behaviour can be configured on a very flexible way - maybe too flexible? 
Just read the midibox64.ini file, which is part of the mk_syx package:
################################################################################
# LED Map: assignes the LED shift registers to the Button Shift
# registers or special values
# Currently following values are supported:
# 0 Default Setting (see Map below)
# 1 Button Shift Register 1 (Button ID #1-#8)
# 2 Button Shift Register 2 (Button ID #9-#16)
# 3 Button Shift Register 3 (F1-F4 and Navigation Buttons: ID #17-#24)
# 4 Button Shift Register 4 (Button ID #25-#32)
# 5 Button Shift Register 5 (Button ID #33-#40)
# 6 Button Shift Register 6 (Button ID #41-#48)
# 7 Button Shift Register 7 (Button ID #49-#56)
# 8 Button Shift Register 8 (Button ID #57-#64)
# 9 reserved
# 10 External Bank (1 of 8)
# 11-15 reserved
# 16 MIDI Status received for Button ID #1-#8
# 17 MIDI Status received for Button ID #9-#16
# 18 MIDI Status received for Button ID #17-#24
# 19 MIDI Status received for Button ID #25-#32
# 20 MIDI Status received for Button ID #33-#40
# 21 MIDI Status received for Button ID #41-#48
# 22 MIDI Status received for Button ID #49-#56
# 23 MIDI Status received for Button ID #57-#64
# 24-31 reserved
################################################################################
[LED_MAP]
LED_SR1 = 1 # (Button ID #1-#8)
LED_SR2 = 2 # (Button ID #9-#16)
LED_SR3 = 3 # (F1-F4 and Navigation Buttons: ID #17-#24)
LED_SR4 = 4 # (Button ID #57-#64)
LED_SR5 = 5 # (Button ID #25-#32)
LED_SR6 = 6 # (Button ID #33-#40)
LED_SR7 = 7 # (Button ID #41-#48)
LED_SR8 = 8 # (Button ID #49-#56)
[/code]
So, let's say you want to map the incoming events, which are assigned to button #1..#8, to the first DOUT shift register, then write:
[code]
LED\_SR1 = 16
Best Regards, Thorsten.
right on… thats Exactly the info i was looking for…
maybe someone could incorperate that example in the next itteration of the documentation…