Ok Im back but I still can't sort it

MIOS programming (Assembler)
1

Hi there all. First post for a while :o

Anyway here’s the rub.

I am building the thingy for Live so a 64E would be nice but it does’nt support ain activity directly.

I have need for pots and enc’s.

MB64 would be good but it does’nt support enc’s directly.

I have tried 162547598 times to integrate pots into the 64E and 34647575 times to get enc’s to work with MB64.

I can’t do it !!! :‘( :’( :‘( :’( :‘( :’( :cry:

Would someone like to add the needed bits to either of the asm’s for these devices and mail it to me or even give me some understandable guide to do this.

I can add the values for pots or enc’s manually. :slight_smile:

I can only get enc’s to send on off messages in mb64 ??? :cry:

???

Any help would be greatly appreciated…b4 I go and buy a Behringer

Thanks

Ian

2

Hi Ian,

just send me your modified source code and I will sort out what is going wrong…

Best Regards, Thorsten.

3

Thanks TK    :-* :wink:

I will send it later on

thanks again

Ian

4

i hope this code will be available :smiley:

i would like to be able to have enc and pots on the same core using mb64 type app.

it would greatly inprove my mios understanding as well

5

i’m also very interested.

i tried to implement the encoders in MB64 too, so success.

it would be great, if the modifications are in the download section.

6

tk now has the code in the new mb64e.

yay

7

Mmmmm..nice it works too.

I have 13 faders working with 26 enc’s and 48 buttons.

I did try the change in code to disable the special function buttons but it did not seem to make any difference so I edited the cs button  preset inc and got rid of them that way.

I also disabled the ains in the main asm as directed in the legend but this did not appear to work. That is jitter was present without the pots connected.

Otherwise it is very nice to have the two together.

ian