MIOS Filemanager NGC, IDs, Moduls and SR numbers

novski · November 15, 2014, 7:39pm

Hi

Im trying to configure my MF_NG with a .NGC file.

Still i have problems with understanding the Code for combinations of different modules, ID Numbers and general.

Im Using Modules i all Layouted my self and i have tested them successfully one by one. Now the time is ready to

connect them together and make it complete. But i can’t manage to find out how the IDs and config shold be.

SO to make it not too long i made a chart of my SRIO chain I marked the unknown with a orange round “ID?” and i wold like to know what ID the next LED wold have…

May somebody help me?

Thanks a lot

Novski

FantomXR · November 15, 2014, 8:46pm

Would you please post the NGC file? I’m not sure what you mean by “ID” in this context.

T.K · November 16, 2014, 12:29am

I agree, not enough input to help you.

Best Regards, Thorsten.

novski · November 16, 2014, 9:40am

Ok. I will upload it here.

Let me ask a simplified question:

If i make a LED Marix and configure it like that:

DOUT_MATRIX n= 1 rows=8 sr_dout_sel1=1 sr_dout_r1=2 sr_dout_r2=3

Now i connect a single LED to the next SR output (D7 i think) on SR4. Whats the code to make that single LED light up?

Whats not clear to me is the next ID number after a Matrix…

Thanks

novski

[DEFAULT.NGC.zip](< base_url >/applications/core/interface/file/attachment.php?id=11650)

T.K · November 16, 2014, 8:49pm

You’ve to specify the first ID to which the LEDs should be assigned with “led_emu_id_offset=<id>” in the DOUT_MATRIX configuration.

See also http://svnmios.midibox.org/filedetails.php?repname=svn.mios32&path=%2Ftrunk%2Fapps%2Fcontrollers%2Fmidibox_ng_v1%2Fcfg%2Ftests%2Frgb_1.ngc

Best Regards, Thorsten.

FantomXR · November 17, 2014, 11:42am

I think, that novski wants to connect an LED without a matrix directly to a DOUT and he wants to know which ID he has to define for the LED.

novski · November 17, 2014, 5:16pm

Well that wold be easy. Id=1 ðŸ˜€

No, what im searching for is the id after the Matrix.

If i make a 8x16 Matrix with SR 1-3 and then connect a single direct LED to SR4, D7, the id doesn’t seem to be 129.

what id is it?

Or is my cirquit faulty…?

Best regards

Novski

novski · November 17, 2014, 10:25pm

I found a part of my problems. :no:

Some weeks ago i invested in a IDC Plier. That was already to late. The cable was made bevor and i don’t know where i used it already without success. :pinch:

Never use a normal Plier.

I will come back to the Ids soon. Have to test it tomorrow.