MIOS app for MBHP MIDIBox64?

MIOS programming (Assembler)
1

hi,

I have a “standard” Midibox64 (64 pot/40 button/16 LED/4x20LCD) .

I want to upgrade to 18F/MIOS to develop further hardware/firmware addons.

My question is, is there a MIOS application for a MBHP MB64?

(I want to begin with something that works fully to start with if possible).

thanks for any info or suggestions

2

Hi Duggle,

MB64, MB16E, MBMF and MIDIbox64SEQ will be ported to MIOS as soon as I finished my running projects. In the meantime you could use the ain64_din128_dout128 test application which don’t come with a menu or defined SysEx structure, but already supports 64 pots and a lot of buttons and LEDs.

All the known MB64 features will be available with the ported firmware, but if you want to start with some experiments, an upgrade would already makes sense. :slight_smile:

Best Regards, Thorsten.

3

hi Thorsten,

Thanks for the encouragement. I think I could easily put together an app with fixed pot/button/led functions. Also, the ported MB64 will be awsome!

I guess building up some familiarity with MIOS in a simpler environment first will have benefits for later on, so I shall jump in!

thanks again