Midibox SID (step B) part question.

Parts Questions
1

Hi,

i have just a little question for u.

I ordered for my midiboxsid (step B):

2 MBHP_CORE; 2 MBHP_SID; 1MBHP_JDM; 1MBHP_DINX4…i eliminated the MBHP_LTC module for monitoring midi in/out: is this list right? I’m not sure about DOUTX4: do i need it?

Just another:

Is is possible to create a midi thru port. How?

and is it possible to create a CV out port also?How?

..and can i buy a psu instead of use/modify the old C64 psu? What kind of psu do i buy?

tnx a lot

lee

2

The MIDI Thru port is provided by the LTC Module :wink:

so long,

julian

3

The MIDI Thru port is provided by the LTC Module :wink:

so long,

julian

you forgot the answers for other questions:)  :stuck_out_tongue:

4

i think you need at last 1 doutx1 for the 7 LED’s

so long julian…

for the psu, just use the search function, there are several threats about that topic

so long,

julian

5

i think you need at last 1 doutx1 for the 7 LED’s

so long julian…

for the psu, just use the search function, there are several threats about that topic

so long,

julian

Tnx for this “full” reply

The only doubt i have is about the need of Doutx1/4. In the list for midibox sid B no there is everything i need, leds included, but not doutx4.  The strange thing is that in the schematics CC,Edit and Link leds are connected to doutx1…???

I’ll buy one module..

lee

6

From the “Step_B” page (just _read_everything_ before building!):

in order to save a DOUTX1 module, it’s also possible to use the free J5 to drive the LEDs, see this schematic.

http://www.ucapps.de/midibox_sid_cs/2x20_enc_multi_w_j5.pdf

Seppoman

7

From the “Step_B” page (just _read_everything_ before building!):

http://www.ucapps.de/midibox_sid_cs/2x20_enc_multi_w_j5.pdf

Seppoman

tnx a lot…just read everything :wink: