Album by Marxon
Gallery category: members-gallery
Some Pics of my Sequence hardware.
LPC17 Core - Why using etched boards? 
LPC17 Core
frontpannel
DinX4 with Encoder board connector
Encoder board (back)
Control Board (6)
Control Board - 2x DinX4, 1x DoutX4 stacked
Control Board - 2x DinX4, 1x DoutX4 stacked (side view)
Control Board
Control Board - 2x DinX4, 1x DoutX4 stacked (side view)
Control Board - 2x DinX4, 1x DoutX4 stacked (back view)
Selfmade illuminated Buttons
How to make them: /topic/17186-yaib-yet-another-illuminated-button/?do=embed" frameborder=“0” data-embedcontent=“”>
Selfmade illuminated Buttons 2
How to make them: /topic/17186-yaib-yet-another-illuminated-button/?do=embed" frameborder=“0” data-embedcontent=“”>
Selfmade illuminated Buttons 3
How to make them: /topic/17186-yaib-yet-another-illuminated-button/?do=embed" frameborder=“0” data-embedcontent=“”>
almost finnished
Case (inside)
Case (back view)
Case (top view)
Case
ButtonLed Matrix (back view 2)
ButtonLed Matrix (closeup top view)
6x Din4x, 2x Dout4x, 80x Buttons, 80x Leds - All on one Board 
DinX4 / Matrix Board stacked
DinX4 / Matrix Board not stacked
ButtonLed Matrix (closeup back view)
ButtonLed Matrix
ButtonLed Matrix (full back view)
All in one +12/-12/+5V PSU for SID, FM and SEQ
Assembled from the following parts:
A cannibalized 220V - 12V/3A switching PSU powering
a LM2576 step−down regulator 5V/3A.
A dual Transformer 220V - 2x15V powering
LM7812 and LM7912 regulators.
