I’m trying to finish the design of my breakout box and need to decide on a power supply. What are some proven solutions that builders here have used? What is the max power draw of the AOUT_NG? I would prefer to maintain a low profile and small footprint to keep my breakout box compact. Thanks!
Any of these been used?
http://musicfromouterspace.com/analogsynth_new/WALLWARTSUPPLY/WALLWARTSUPPLY.php
Doepfer DIY or MNT? (DIY seems too big physically and the MNT may be underpowered)
I use Ray’s (MFOS)
I’m not sure of the power consumption, but it’s not much. I only use one set of el-caps.
Thanks Eptheca! I actually just commented on your photo before seeing your comment here. What value caps did you use? Was this just to reduce the overall height of the PSU? I’m looking for a PCB for that now, modular addict is sold out.
I got this kit http://shop.musicfromouterspace.com/cart/wall-wart-bipolar-supply
It’s the one from MFOS you linked to.
I only use it to power the AOUT_NG, so to reduce the height I only use one pair of caps laying down
I used the caps that came with the kit, they are 4700uF
they have the bare PCB as well http://shop.musicfromouterspace.com/cart/Power%20Supplies/MFOS%20Wall%20Wart%20Bipolar%20Power%20Supply%20Bare%20PCB
Aciiiiid post
I must have been ordering from MFOS as you were posting that…but I only got the PCB, didn’t realize there was a kit. I’ll go back and have another look. Thanks for your help
I only see a kit for the adjustable PSU, but I can source these parts myself with ease, I’m sure.
Face palm. Now I see that the first link you sent goes to the kit, but I couldn’t find that available when browsing their shop. I already ordered the PCB, so I’ll just get the parts from Mouser
meanwell rt65b