LC programming question

MIOS programming (Assembler)
1

Hi,

(as mentioned before) I’v built two MB LC Boxes in one case. The software is cubase.

Each box is on a different midi interface

I connected the most recent buttons for both boxes via diodes together. So, for example, when I press the Bank right button both boxes are displaying the next 8 channels.

The big problem with this is, that I always have to arrange my box from channel 1 to 8 and 9 to 16 before pressing the “diode coupled” switches. And it only works correct when the project has more than 16 channels, of course.

My question is: Is it possible with mios to program the boxes in a way that box one starts with channel 1 to 8 and the second Core recognizes channel 9 - 16 ?

In other words: Core 1 is only for channels 1 to 8 and Core two only for channel 9 - 16.

Of course, when I then press the bank right switch, the boxes should display channel 17 … 32

Are the channels “changable” or is it fixed in the host message wich channels are displayed ?

Please help  ???

greets

Doc

2

Hi doc,

Cubase SX at this point  does not support two Midibox LCs in Mackie Control Emulation mode (Mackie Control and Mackie Control XT). What you’re trying to do is a non standard emulation of the MC protocol. Nuendo’s next release in early May will have Mackie XT support which will then allow correct functioning of 2 midibox LCs.

So i guess Cubase SX support for more than 1 Mackie Controller will follow shortly after Nuendo in their next update of cubase SX.

Peace

Frank

3

Thank you Frank,

looks like I have to wait …

greets

Doc