when i got a shuffled track ie. the ordinary shuffle where each second/even step is laid back 8 ticks…then i switch on random dir/step…the pattern seems to be a bit out of sync…i know it isn´t …that´s because more than one laidback steps like 2,4,4,8,6 are triggered in series, if i get it right…but then it would be nice, they stay in the dedicated shufflegrid, something like a mastergrid where u can use shuffle on…maybe similar to the “hardwired shuffle” in the mb808, where i just use a pot for intensity. just a thought…
second Q.
i own a fr777…maybe someone knows the sequencer of this unit…
theres a nice trick for binding notes or define steplength for each note…it´s like
pressing a step, let´s say step 5, hold the step and simultaneously press the step to which the note should bind to, let´s say 9…there u got the gate/length set from 5 to 9…
…if its too much affort to pack it into seq 3.x , maybe into 4?..what do u think?
The shuffle/groove doesn’t sound right with direction parameter is doing funky things… - seconded.
I’ve got a FR-Mobius.. FR’s dedicated sequencer, and I like the way it implements note length… quick and easy.
The MB-SEQ way is pretty good too, lets you make note length and you are not limited to 1/16th resolution.. (1/96th resolution!) but it is a bit quirky when you want to make a note much longer.. requires sometimes quite a bit of knob turning.
I agree that it would be better to take the “reference step” as basis for the groove pattern, this only requires a small change in V3 and V4, so I will do this with the next V3 release. Especially for V4 this change will open new possibilities, e.g. in conjunction with the new progression parameters and customized groove templates (e.g. a groove only varies velocity, so that an additional CC track isn’t required to generate effects like demonstrated in the MP3s)
Note length: would it be ok if such a length entry is only available in the Length Layer, and not in other parameter layers? Such a feature can only be added to V4 of course!
Note length: would it be ok if such a length entry is only available in the Length Layer, and not in other parameter layers? Such a feature can only be added to V4 of course!
Oh yea! The “2 finger spanning” method of note length would be a great feature..
wow sounds great…small change?..ok, nice…maybe something for the mb808 as well
Note length: would it be ok if such a length entry is only available in the Length Layer, and not in other parameter layers? Such a feature can only be added to V4 of course!
for sure…if this could be implemented , would be awesome…oooh , time for me to get hands on seq v4 , i think…is there a way to order stm32-presoldered boards somewhere in germany? …i don´t mind soldering them on my own , but i can´t burn them…or is there a simple diy burner for stm32?
is there a way to order stm32-presoldered boards somewhere in germany?
I will get 5 new boards with presoldered STM32 from Smash soon. Two are already reserved for friends, two are for myself, so I could give you the remaining one if nothing unexpected happens (e.g. a friend notices problems with his board) (obsolete, but progress at Smash’s side is very good, so that boards can be purchased from him directly!)
…i don´t mind soldering them on my own , but i can´t burn them…or is there a simple diy burner for stm32?
Smash did some layout improvements to ensure perfect production results. I can give a “go” for “mass production” once I got the new prototype and tested it successfully.
how much will it be with presoldered chips?..
PCB + preassembled STM32F103RE + preprogrammed MIOS32 bootloader: ca. US $25! (unbeatable price :))
It makes sense to order the board+STM32 only to avoid customs.
In Germany, the remaining parts can be purchased at Reichelt.
smash did some layout improvements to ensure perfect production results. I can give a “go” for “mass production” once I got the new prototype and tested it successfully.
yepp…makes sense…guess i´ll have too wait then…(…oh, i´m bad at this )
$25 is absoluvly fine…presolder/bootstrapped…i´ll go with this…since i´m etching boards myself, it´s a pain in the a$$ doing this with dual sided and smd parts on it…
…weehee…mucho thanks so long…i´ll go ´n finish my two seq3.4 these days…
