Hello crew ;D
My MBHP has come to some satisfying point, but I still need to connect those bluddy rotary encoders (both detended, one with switch) to my working DIN (already 4 buttons on it that works perfectly well).
I didn’t find any scheme on ucapps.de that would show me how to solder those babies on the PCB.
Could you please help ??
Thannxxxxx 8)
Goule
Hi,
everything´s on uCapps. As it is to be expected, connections to a DIN board are explained on http://www.ucapps.de/mbhp_din.html - just look under “Additional information”.
Even if you have an encoder type not mentioned on this page, there are only 3 pins coming from an encoder and you can swap them as you like until it works as intended. You can´t damage anything.
Merry Christmas,
Seppoman
Hello,
Thanx for reply and greetings 
One of my encoders have 5 pins that’s why I wrote I didn’t find the corresponding scheme. Anyway, I think the logic is the same (3 for rotary + 2 for switching ?)
Merry christmas and a happy new year for you and all that midibox tribe 8)
Goule
One of my encoders have 5 pins that’s why I wrote I didn’t find the corresponding scheme. Anyway, I think the logic is the same (3 for rotary + 2 for switching ?)
Yes.
Probably the encoder with a switch has 2 pins on the second side. Those are switch contacts.
Bye, Moebius
Yes it finally worked that way. Thanks to all
Goule