I want to built a Midi to CV/Gate.
A DAW will feed the module with midi and Instruments will be triggered.
I need Midi in/through and USB midi, 16x CV and 16 Gates.
My Idea about what to be used is :
STM32F4 Core
2x AOUT_NG for 16 CV
1x DOUTx4 for 16 Gate triggers
Midi In and Thru and Midi USB
Is MIDIbox NG suitable for me???
*BUMP*
PLZ Guys!! Can someone answer me that simple question??
I am asking again.
I Need a module that will only receive Midi.
1x DOUTx4 will give 16 Gate triggers
2x AOUT_NG will be daisy-chainned to give 16 CV channels for output a CV trigger that will control the velocity
Serial Midi in/Thru and usb MIDI is what i need
An STM32F4 Core will be used.
Is MIDIbox_NG suitable for this minimal module?
In Simple words.. I need a MIDI to 16 CV & 16 GATE Interface
Sounds more like MIDIbox CV no? As far as I know only 8 CV channels are possible, but you might be able to have more gates. You’ll need a level shifter if you want more than 3(.3) V gates i.e. 5 V or greater.