Has anyone success to program merger with icprog?

Steven_C · January 19, 2003, 2:53pm

Just wondering…

if someone has had success, could you copy the text in the buffer after you load the hex into ic-prog and email it to me at loonatron@yahoo.com? but only if you have built a working midimerger using ic prog.

thanks heaps…Steve C

T.K · January 21, 2003, 1:36am

Hi Steve,

here are some snapshots - I’m working with this setup for PIC16F877 and PIC18F452 since some weeks and never got a programming error Although I own a PICstart Plus kit from Microchip, I switched to the JDM since IC-Prog works faster (especially on PIC18F’s which can be programmed within 30 seconds)

Best Regards, Thorsten.

Steven_C · January 21, 2003, 9:32am

;D ;D ;D ;D ;D ;D ;D ;D

Thanks for all that effort! Its very kind of you to put such step by step configuration on the forum for me!

I hope it didn’t take too long! I just loaded the file in, without problems! now I gotta go set up my gear to try it out!

thanks again, you legend! from Steve : :

Steven_C · January 26, 2003, 8:50am

yeah! works kool!