Album by GMAprogrammer
Gallery category: members-gallery
Layout
Here i have just laid out the button PCBs on my working Table
Carboard Hold Pannel
This Prototype of the Hold Pannel ist made out of 2mm Cardboard. I made it to check my CAD drwaings from the Computer
MA4PC Logo
This is the Logo for my Project it will be prited on the upper Frontpannel next to the Screens. It was designed by my aunt in law
she ist illustrator and grafic designer
BCF2000 x2 + Elo Touchscreen 17"
The very first version of my own lightdesk. More a bulk of different devices
Cabeling the single PCBs together
For the Cabeling i use colorcoded Cables. And i used some special Plugs from Reichelt to get every single PCB removal
First selfmade PCB
This is my first version. This PCBs ive made on my own in my celler … but i didnt turned out that well
Cardboard Prototype
Here i made the Frontpannel out of 2mm Cardboard for Prototyping purposes
Midibox Components
This are the first Midiboxcomponents finished: LP17 Core + 3x DIN
Holpannel for the Midibox Components
the holdpannel for the midibox Components
i made it on my own a lot of alu to file
LEDs Working
Here i got the LEds to work with the MIO128 application an a little test Program Chris wrote me
Many thanks to him BTW! Without him this Projekt would not be existing!
Buttons and Faders
Here i laid out the Buttons+ the Faders on our kitchen Table… Mum was not that Happy
Testing/Troubleshooting
Heere i used my Netbook to troubleshoot the Matrix wiring of the Buttons
More cabeling
Motorfader PCB just for wiring purposes
This is a small PCB i designed for the Motorfaders to provie me GND and VSS for each fader its just for better wiring not for stability
MA4PC
Here ive just added the Frontpanel and the Screenpannel for my Birthday Party
so my friends can have a look on what ive building on for the past Year.
MA4PC Drawing
this is the 3d Model of my Project. Exported from Autodesk Inventor which i used to plan and desg the whole Casing
DIY GrandMA
This ist the Current Version of my lighting desk using 2x 12" Elo Touchscrens, 2x BCF200, a Novation Launchpad, 4x Griffin Powermate and a ripped apart Laptop build together in a CAse
MA4PC Ready for Show
In the last few days i made some major progress in my Project. Now its nearly finished to Light up the firt Show !
MA4PC Bugs over Bugs
The last few days where very frustrating cause of many bugs that apeared during the assembling of the lighting desk. Thanks again to TK who gave me the Input which helped me to overcome this issues. Some of them are still there but they will be solved after i put it through some Testgigs. For Backup there will be always another Lightingdesk connected in a Fulltracking Session next to my MA4PC.
