[fixed] sammichSID CS Buttons, Encoder Not Working

MIDIbox SID
1

Hi,

just making my SammichSID kit. Have done all the soldering for base and CS boards, installed SID application. That seemed to go OK, and when the box boots up, I see the first SID application screen showing the patch name. When I send MIDI notes, the LEDs seem to work, but none of the controls, buttons or encoder, seem to do anything. At this point, I have everything installed except the SIDs. Any ideas what might have gone wrong?

a|x

2

Problem solved!

Turns out I had some of the shift-register chips mixed up. I stupidly assumed they were all the same, and didn’t read the parts list properly, so some were in the wrong places. Reinstalling them in the correct locations seems to have fixed the problem.

Sorry for wasting your time, guys.

a|x