Hi All,
This is priced at under £200 or under 300 Euros. Please check www.evolution.com for full specs. Has anyone an idea as to how much a MB offering the same specs would cost?
Cheers
Hi All,
This is priced at under £200 or under 300 Euros. Please check www.evolution.com for full specs. Has anyone an idea as to how much a MB offering the same specs would cost?
Cheers
You want to make this with MBHP ??? :
(seen on www.evolution.com)
I think your link is not correct !
Try this one :
Gilles
You want to make this with MBHP ??? :
(seen on www.evolution.com)
I think your link is not correct !
Try this one :
Gilles
Cheers Gilles
Cheers Gilles
1 x MBHP_CORE + Power supply
Partlist: http://www.ucapps.de/mbhp/mbhp_core_orderlist.txt
Price of components: ca. 27.5 EUR
2 x MBHP_AINX4
Partlist: http://www.ucapps.de/mbhp/mbhp_ainx4_orderlist.txt
Price of components: ca. 2 x 3.5 EUR = 7 EUR
1 x DINX4
Partlist: http://www.ucapps.de/mbhp/mbhp_dinx4_orderlist.txt
Price of components: ca. 5 EUR
1 x LCD
Displaytech 2x16, Part number LCD 162C LED (2x16 with backlight)
Price of component: ca. 13 EUR
BankStick
24LC256-I/P, Farnell Part number 3001696
Price of components: ca. 5.3 EUR
24 pots with knobs
Partlist: see http://www.ucapps.de/mbhp/mbhp_dinx4_orderlist.txt
Price of components: ca. 24 x .5 EUR = 12 EUR + 24 x .73 EUR = 17.5 EUR
32 buttons
e.g. TASTER 3301B (caps: unknown)
Price of components: 32 x 0.1 EUR = 3.2 EUR
9 sliders
e.g. SCHIEBEREGLER LIN 10 K from conrad, Part #441449 - 14
Price of components: ca. 9 x 1.9 EUR = 17.1 EUR
Vectorboards instead of PCBs
2 x H25PR200
Price of components: ca. 2 x 2.0 EUR = 4 EUR
Case
from the DIY market
Price: ca. 10 EUR or more
Frontpanel
Selfmade: 0 EUR
High quality from Schaeffer Apparatebau: ca. 50 EUR
makes: ca. 122 EUR, or ca. 171 EUR with professional panel
with premade PCBs: ca. +20 EUR
-
a lot of DIY fun
-
the possibility to use it as sequencer, as SID synth CS or whatever
When you buy the components in the US, it will possibly be cheaper
Best Regards, Thorsten.
1 x MBHP_CORE + Power supply
Partlist: http://www.ucapps.de/mbhp/mbhp_core_orderlist.txt
Price of components: ca. 27.5 EUR
2 x MBHP_AINX4
Partlist: http://www.ucapps.de/mbhp/mbhp_ainx4_orderlist.txt
Price of components: ca. 2 x 3.5 EUR = 7 EUR
1 x DINX4
Partlist: http://www.ucapps.de/mbhp/mbhp_dinx4_orderlist.txt
Price of components: ca. 5 EUR
1 x LCD
Displaytech 2x16, Part number LCD 162C LED (2x16 with backlight)
Price of component: ca. 13 EUR
BankStick
24LC256-I/P, Farnell Part number 3001696
Price of components: ca. 5.3 EUR
24 pots with knobs
Partlist: see http://www.ucapps.de/mbhp/mbhp_dinx4_orderlist.txt
Price of components: ca. 24 x .5 EUR = 12 EUR + 24 x .73 EUR = 17.5 EUR
32 buttons
e.g. TASTER 3301B (caps: unknown)
Price of components: 32 x 0.1 EUR = 3.2 EUR
9 sliders
e.g. SCHIEBEREGLER LIN 10 K from conrad, Part #441449 - 14
Price of components: ca. 9 x 1.9 EUR = 17.1 EUR
Vectorboards instead of PCBs
2 x H25PR200
Price of components: ca. 2 x 2.0 EUR = 4 EUR
Case
from the DIY market
Price: ca. 10 EUR or more
Frontpanel
Selfmade: 0 EUR
High quality from Schaeffer Apparatebau: ca. 50 EUR
makes: ca. 122 EUR, or ca. 171 EUR with professional panel
with premade PCBs: ca. +20 EUR
-
a lot of DIY fun
-
the possibility to use it as sequencer, as SID synth CS or whatever
When you buy the components in the US, it will possibly be cheaper
Best Regards, Thorsten.
The overlay idea for these MB’s could be well worth pursuing.
Ian
The overlay idea for these MB’s could be well worth pursuing.
Ian
MBHP ROCKS!
I would spend extra just to make it my own design.
Although it is nice to save money, one thing that sets uCapps MBHP over the rest is it’s possibilities for future upgrades.
The layovers are nice, could be useful for remembering bank layouts. Make one for Reason, one for Tracktor, etc…
How about LCD’s for every knob and slider !!! HA
;D
-Sephult
MBHP ROCKS!
I would spend extra just to make it my own design.
Although it is nice to save money, one thing that sets uCapps MBHP over the rest is it’s possibilities for future upgrades.
The layovers are nice, could be useful for remembering bank layouts. Make one for Reason, one for Tracktor, etc…
How about LCD’s for every knob and slider !!! HA
;D
-Sephult
The overlay idea is great!
Funny, I have the same idea http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=parts_q;action=display;num=1052951961 before seeing this device from Evolution  :D
Real inspiring!
The overlay idea is great!
Funny, I have the same idea http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=parts_q;action=display;num=1052951961 before seeing this device from Evolution  :D
Real inspiring!
As the UC-33 comes ready built, with overlays. etc. My question has to be what is the advantage in building something similar?
Don’t get me wrong, I love the whole concept of MB but we have to be real about it…there is now a plethora of surfaces coming onto the scene at lowish prices. Why can’t we design a Housten and a Mackie clone which is far lower in cost offering an exact copy of what is offered from them? Why, cuz we can’t buy P&G faders at the right money…so here’s an idea…Let’s make a clone of the UC-33 which costs under a $100.00 all in…including the case and pro front panel…offer it as a kit…and away we go!
Scared!
So am I…but if we operate as a co-op we can make it…I’ll chip in…$500 to start
Darren
As the UC-33 comes ready built, with overlays. etc. My question has to be what is the advantage in building something similar?
Don’t get me wrong, I love the whole concept of MB but we have to be real about it…there is now a plethora of surfaces coming onto the scene at lowish prices. Why can’t we design a Housten and a Mackie clone which is far lower in cost offering an exact copy of what is offered from them? Why, cuz we can’t buy P&G faders at the right money…so here’s an idea…Let’s make a clone of the UC-33 which costs under a $100.00 all in…including the case and pro front panel…offer it as a kit…and away we go!
Scared!
So am I…but if we operate as a co-op we can make it…I’ll chip in…$500 to start
Darren
You are a fool!
— end of discussion from my side —
Best Regards, Thorsten.
You are a fool!
— end of discussion from my side —
Best Regards, Thorsten.
[quote name=Sephult
How about LCD’s for every knob and slider !!! HA
;D
-Sephult
[quote name=Sephult
How about LCD’s for every knob and slider !!! HA
;D
-Sephult