EMV and TFT monitors

Miscellaneous
1

I bought a LVDS flat panel with CRT-converter and inverter. I think they were thought to fit into laptops (exept of the converter).

Could it be a problem, when I mount the inverter in the housing right behind the flat panel (like disturbing the picture)? Is it more clever to mount it at the base?

Greets, Roger

2

Hi,

Could it be a problem, when I mount the inverter in the housing right behind the flat panel (like disturbing the picture)? Is it more clever to mount it at the base?

This isn’t CRT ;D, no problems with picture whatsoever :wink:

Well, a friend of mine is working on his own DIY converter - his display is from an old laptop, and guess what, inverter is actually attached to the backside of the display.

Bye, Moebius

3

Thanks Moebius

inverter is actually attached to the backside of the display

… so your friend didn’t mount any shielding plate between display and inverter?

Roger

4

no no. Inverter was already placed there in the laptop - so why change that :wink:

Bye, Moebius

5

This is the controller and TFT I bought:

http://www.byho.ch/ishop24/product_info.php/products_id/70

http://www.byho.ch/ishop24/product_info.php/products_id/86

… it’s all new material.