tgp
1
*beforehand warning*, yes i know its alot and is going to be alot of cores/modules:
3 x CORE
24 motorfaders = 3 x MF module
24 Analogue Pots (pan pots) = 1 x AIN
24 Encoders = 2 x DINX4
150 buttons = 5 x DINX4
288 meterbridge LED’s (12x24ch multiplexed) = 2 x DOUTX4
264 LED ring LED’s (11x24ch multiplexed) = 2 x DOUTX4
144 standalone LED’s = 5 x DOUTX4
so…
3 x CORE
3 x MF module
1 x AIN
7 x DINX4
9 x DOUTX4
so 3 cores will be plenty for that right? 3 cores would support 12 DOUTX4’s and 12 DINX4’s.
that look ok? im going to be having displays but that wont affect module requirements.
let me know if im off!
thanks.
taylor
Heya tgp
Are you planning on using the LC app? If so this list might not get you there…
For 24 channels on the LC app think 3 separate 8 channel LCs.
288 meterbridge LEDs (12x24ch multiplexed) = 2 x DOUTX4
Think 96 meterbridge LEDs (12x8ch) + 88 ring LEDs = 1 x DOUT per group of 8 channels…
See:http://www.ucapps.de/midibox_lc/midibox_lc_ledrings_meters.pdf
If you are writing your own app, you could do 24 channels of multiplexed meters/rings from one core, etc.
Best 
Smash
tgp
4
hey smash, thanks for the reply.
yes, this will be an 3xLC box(s).
hmmm. let me think about this DOUT again and post when i get back (running out for a few hrs).
do you have this stuff in stock smash? i’ll be looking at ordering all of it early in the week if possible.
thanks.
taylor