And has anyone ever heard of an interface that does?
I tried uploading MIOS back into my interface (lexicon Omega) using the loopback trick. I sent the .hex file manually, to force it. Now I opened up the IN and OUT midi monitors. I saw the hex file being transmitted, but did not see it being recieved. So does my unit filter sysex messages? Have you ever even heard of such a thing?
And I also have an M-audio oxygen 8 keyboard controller that has a USB with midi out. No midi in. could I use this to transmit and upload MIOS?
I wouldn’t think it would be a good idea for anything to do that on it’s own. If there’s no fancy control panel/patchbay for the MIDI part of the interface, I would guess it lets everything go.
Don’t know on the Oxygen either, but if the port shows as a standard MIDI out available to your DAW software,etc., I would guess that should work as a one way dump.
Are you sure that the midi out of the core is working ? if not it isnt able to send the checksum. but it should run in manual mode when everything is alright. even without a midiout on the core.
I saw the hex file being transmitted, but did not see it being recieved.
Do you mean by this, that you had a MIDI LED flashing on your interface? If this is the case, I would strongly suggest you triple-check your MIDI I/O connections at the core. These connections are equally easy to get wrong, as right.
If you mean you had acknowledgement from the host program that it was sending, check the above, but also check your interface settings.
