Heya!
I was wondering if it is possible to have DIN sync clock out or even (one) CV/Trigger/Gate per sequence with the seq v4 lite.
On the project page it is stated “working, but configuration is too difficult, therefore not documented.”
From how I understand, DIN sync can be achieved via a DOUT sihft register with 5V logic levels in the stm32f4 core.
I assume the complication in the v4 lite project comes from the fact, that there is no display and thus no way to configure/set the clock/start/stop signals?
Maybe someone can shed a light on how it could be achieved? I’m happy to change the software to make it work if that is necessary but would need some hints.
Best regards, stahl