# DataWheel  Midibox64

**URL:** <https://forum.midibox.org/t/datawheel-midibox64/17841>\
**Category:** MIDIbox HUIs\
**Created:** [September 26, 2013, 6:42pm UTC](https://forum.midibox.org/t/datawheel-midibox64/17841 "2013-09-26T18:42:26Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![production](https://forum.midibox.org/letter_avatar_proxy/v4/letter/p/ecc23a/32.png) [@production](https://forum.midibox.org/u/production)\
**Post date:** [September 26, 2013, 6:42pm UTC](https://forum.midibox.org/t/datawheel-midibox64/17841/1 "2013-09-26T18:42:26Z")

</div>

Hello, sorry for my English is not only a google translation of my french  
&nbsp;

Well, I’m on the end of a MIDIbox64 for Hammond clone, but I do not understand how (despite the explanations I could Rescueing) replace the navigation buttons by datawheel in the program. I need help.

&nbsp;

Thank you in advance to all

---

<div class="post-metadata">

**Author:** ![T.K](https://forum.midibox.org/user_avatar/forum.midibox.org/t.k/32/7_2.png) [@T.K](https://forum.midibox.org/u/T.K)\
**Post date:** [September 27, 2013, 3:06pm UTC](https://forum.midibox.org/t/datawheel-midibox64/17841/2 "2013-09-27T15:06:56Z")

</div>

It requires some changes in setup\_midibox64.asm and mios\_tables.inc (as described in the files), but I must admit, that the change isn’t straightforward… in addition you’ve to install the MIOS toolchain to recompile the application.

Anyhow, I could change the setup for you and give you a .hex file… Next week after my holidays.

Best Regards, Thorsten.

---

<div class="post-metadata">

**Author:** ![production](https://forum.midibox.org/letter_avatar_proxy/v4/letter/p/ecc23a/32.png) [@production](https://forum.midibox.org/u/production)\
**Post date:** [September 28, 2013, 10:49am UTC](https://forum.midibox.org/t/datawheel-midibox64/17841/3 "2013-09-28T10:49:15Z")

</div>

it will be super nice of you, thank you. And I await your return from holiday with impatience.

---

<div class="post-metadata">

**Author:** ![T.K](https://forum.midibox.org/user_avatar/forum.midibox.org/t.k/32/7_2.png) [@T.K](https://forum.midibox.org/u/T.K)\
**Post date:** [October 5, 2013, 7:54pm UTC](https://forum.midibox.org/t/datawheel-midibox64/17841/4 "2013-10-05T19:54:31Z")

</div>

Finally a preconfigured firmware where the left/right button can be replaced by an encoder:

[http://www.ucapps.de/mios/midibox64\_v2\_4f\_with\_datawheel.zip](http://www.ucapps.de/mios/midibox64_v2_4f_with_datawheel.zip)

&nbsp;

DIN Assignments:

EXIT button at D7

SNAPSHOT button at D6

Encoder at D4/D5

&nbsp;

Best Regards, Thorsten.

---

<div class="post-metadata">

**Author:** ![k-rAd\_MB6401](https://forum.midibox.org/user_avatar/forum.midibox.org/k-rad_mb6401/32/498_2.png) [@k-rAd\_MB6401](https://forum.midibox.org/u/k-rAd_MB6401)\
**Post date:** [February 20, 2014, 6:53am UTC](https://forum.midibox.org/t/datawheel-midibox64/17841/5 "2014-02-20T06:53:02Z")

</div>

wow i could have used that a long time ago. just figuring out the encoder thing now and i built my box more than 6 years ago. &nbsp;;)

I’m going to have to modify it a bit and add that one encoder for up and down scene selection in ableton.