Count me in for a kit!
BTW, I have a school project due in…ummm…two weeks… My entire career rides on the paper I’m writing about it. Can I get all my parts by then???
;D
Just for the newbies: The above post was a joke. DW can get away with it cause he’s a regular around here…
Just a thought from me: When you say “I’m waiting patiently” - that is not waiting patiently! That’s waiting loudly.
That is one mighty fine and thoughtful speech i must say wilba.
Smash if youre reading this, i hope the stress levels are low, and the morale levels are high!
Keep in there dude, and keep the workload balanced, dont ever let it start to break your back!
Does anyone else feel deep down that we should send the head honchos on this forum a gift or something as a token of our appreciation, for the hard work they put in?
I know we have the donation buttons (something i hope to use someday, when i get a job/welfare of some sort!)
When you consider all the money you save in comparrison to a sidstation it only feels right to do so.
Sorta OT but can’t be stressed enough:
Donating is definitely a way to go, but a lot of people (like me, sadly) have the choice to either build boxes or donate. For those (and all others): A “thank you” to Smash, TK, Wilba, Twin-X, strys_one (list incomplete and in no particular order) and whoever helped you out with your projects is always greatly appreciated. Soooo, give credit where credit is due - an *honest* “thank you” is a really good way to help keep the contributors to this mighty fine project motivated ;D
T H A N K S!!!
Okee guys now im confused :o is there a list somewhere??? if already posted in the second pcb batch thread so i think im on a list somewhere but where??? also posted in the partkit thread so im on the list there to…but there are to many threads that through the threads you cant see the words…hahahaha
Hi, is there any possibility to get the project of MB-6582 main and controller boards like in other MidiBox projects (in .brd file)?
best regards and thanx for wonderful work
jarek (.pl)
T H A N K S!!!
What kind of good thing happened?
an *honest* “thank you” is a really good way to help keep the contributors to this mighty fine project motivated ;D
Colours also work. The marquee/move/scrolling tag can earn you a ban though. ;D
Colours also work. The marquee/move/scrolling tag can earn you a ban though. ;D
Ah, stupid me… Thanks.
[move]I dare you I am lame[/move]
Last edited by Santa Claus
[move]I triple-dog dare you[/move]
I received the base board part kit, and I’ll start solder this week-end ;D it will be a 6582R (rack)
It is long but it is good.
Damn mine won’t be the first rackmount then 
Again, to all of you who make this possible… THANKS!!!
No need to complain about not finishing my MB6582 yet, I’ve had projects sitting on my bench for allot longer that still arent finished. Plus I wouldn’t be as far as I am already without everyone’s help!!!
Umm… Am I horribly wrong with this, or is this the right place to post the preorders for the PCB or the kit?
If it is, count me in for 1 PCB and 1 KIT with PICs. Thank you, and thank you a lot for all who has done all this possible! Seriously, this is just so awesomely cool!
Dude. did you read the thread?!
Umm… Am I horribly wrong with this, or is this the right place to post the preorders for the PCB or the kit?
If it is, count me in for 1 PCB and 1 KIT with PICs. Thank you, and thank you a lot for all who has done all this possible! Seriously, this is just so awesomely cool!
I’m new to this project, as well. Have been collecting parts for a little while (so far I have purchased the PAC-10 case, ALBs knobs from a bulk-order, and SIDs from Wilba’s MEGA-SALE #5). I understand it can be confusing, because there is a lot of information located in many places on this forum, in the Wiki and on ucapps site. I’ve read and re-read countless threads to make sure I don’t miss anything.
As far as I can discern from my research, if you want MB-6582 PCB’s and base parts kits, you just need to wait and keep checking back until there is an announcement that they are available at SmashTV’s web store. I read somewhere that a message will go out to all forum users when these are available. As far as I can tell, you cannot sign up for these any longer.
The critical piece, in my estimation, are the PCB’s. Unless you have the expertise to design one of these, the ability to etch the PCB or the money to pay a company to etch it for you (after you design it), you will only be able to get one through Smash when they are available. All of the other parts you can get on your own, just check the Wiki for the parts list and shop around places like Mouser.
There is an information overload for sure, but as far as purchasing parts/pcbs/kits/etc goes, there’s a really good post HERE by Wilba which is a sticky and explains it all 
heheh
There is an information overload for sure, but as far as purchasing parts/pcbs/kits/etc goes, there’s a really good post HERE by Wilba which is a sticky and explains it all Smiley
heheh
10 PRINT “FORUM TOPIC 11367”
20 GOTO 10
READ BELOW if, like me, you fall into Scenario 4: “I have recently discovered the MB-6582 project and have no parts for it at all. Where do I start?”
http://www.midibox.org/forum/index.php/topic,9838.0.html
Last Post in the topic:
Topic is locked until further notice.
Smash is working on the kits and it is pretty obvious now he needs to order alot.
No need to sign up anymore i think he gets the picture now.
To much poisening on this thread. We will send out a message to all members when the kits are available.
Regards,
Jeffry
I haven’t put my name on any pre-order list, based on this information. I’m pretty sure we just need to wait until the announcement. If I’m wrong, let me know. I didn’t see this specific information listed in Wilba’s definitive post. So, I’m posting this as a clarification for newbies like me. Well, maybe they aren’t like me if they don’t take the time to read. I love reading these threads, I learn a lot and get enjoy all the different personalities. Especially Goblinz. He wants me to save my $7 crappy geiger counter in case of nuclear war. But, I’m going to canibalize it anyway and stick a SID in there.