Hello Everybody !
Little trouble for a non-specialist in electronics…
I’m making five MIDIO 128 to replace a few J Wale midi cards on different automatic music instruments (organ, accordion, piano..). I get core kits from SmashTV, DOUT from myself and all is fine. Just a trouble with changing channels and outputs midi notes. I edited the midio.ini file with Notepad++ and tried to change outputs, for example:
1 = 90 30 7F 91 30 00 @OnOff (note on ch1 C3, note off Ch1 C3)
by this: 1 = 91 31 7F 91 31 00 @OnOff (note on ch 2 C#3, note off Ch2 C#3)
I uploaded the sysex with MIdiox without any problem, but no change for midi outputs ! I was able to only change the midi channel if using the search/replace fonction of Notepad++ for changing all the “90” by “91”. But no possible to change a few parameters on a line…I need to have more than one channel on each card. Perhaps I forgot something ? Am I wrong somewhere ?
Hope somebody could help me, not very easy to drive 5 Midio128 on only one channel !
Thank you by advance !
Chris
