Can't upload SIDv2 app to core

MIDIbox SID
1

I have a PIC18F4685.

BSL.1.2B MIOS V1.9F

application is “midibox_sid_v2_0_rc20”

getting error:

Sending block 00008400-000084FF

Received error code 05: Write access failed (invalid address range) - used by 1st level bsl

Sending block 00008400-000084FF

Received error code 05: Write access failed (invalid address range) - used by 1st level bsl

Sending block 00008400-000084FF

Received error code 05: Write access failed (invalid address range) - used by 1st level bsl

Aborting after 3 errors

Any suggestions?

2

different error…

I have a core prepped for the Midibox CV project that also has the CV app loaded in it fine.

I swapped out the PIC for the one I cannot upload the SIDv2 app on.

When I try to upload through that Core I get this error…

Sending block 00008400-000084FF

Received error code 08: 2nd level bsl: Read/Write command tried to access an invalid address range

Sending block 00008400-000084FF

Received error code 08: 2nd level bsl: Read/Write command tried to access an invalid address range

Sending block 00008400-000084FF

Received error code 08: 2nd level bsl: Read/Write command tried to access an invalid address range

Aborting after 3 errors

3

Are you using the latest MIOS Studio? (7_5 I think)

4

that was it! thank’s a bunch Stryd!  ;D

5

Cool. I’ll take payment in the form of pics of your box :slight_smile:

6

coming right after I finish wiring up the CS.  :smiley: