c64 optimized psu design in eagle or vectorboard format ?

MIDIbox SID
1

Hi, i am trying to design a small pcb or vectorboard which would hold the c64 optimized psu, 2 banksticks and a DINx1 (or DINx2 if possible).

i downloaded the free eagle software and DIY Layout Creator, but i am having a difficult time trying to recreate the optimized psu from scratch.

maybe if someone would not mind to share their vector board or eagle design it would be really helpfull.

thanks :slight_smile:

2

Hello mat_s,

I’m planning to make a schematic for PSU and two banksticks… no DIN, sorry :frowning:

and the board layout is quite unusual: it’s triangular shaped, but it should be easy to place the components as you need.

Is it good the same for you?

A question for the others: is it possible to use the Bankstick connector (J4) to also carry power to the Core? The schematic lets me think so, but who knows…

3

Yes, thanks, the psu would be really helpful! :slight_smile:

4

Here is the stuff!

Please double/triple/quadruple check the wirings… I take no responsibility if you see some smoke from what you built from this schematic!!

Best regards,

Enrico

[psu_bs.zip](< base_url >/applications/core/interface/file/attachment.php?id=150)

[psu_bs.zip](< base_url >/applications/core/interface/file/attachment.php?id=3291)

5

that’s perfect, thanks enrico :slight_smile: