Hi
are anyone interested in some 4x40 LCDs ? (with Backlight of course) They´ll cost 10.- Euro per piece…
If interests post here, PM, send carrier pigeon… 
Download Datasheet
Regards
MTE
EDIT : Also nice 2x16 LCDs with red character availabe, look at the wiki -> http://www.midibox.org/dokuwiki/lcds_bulk-order
Yes
yes i would like one
where did you find it?
Hi
where did you find it?
from a seller 
I need at least a inquiry of 50 pieces to get this price (sorry, I forgot to write this down yesterday)
Also I found another great source of 2x16 LCDs with nice inverted red characters !!!
For the price I must deal with the Seller, depends also of the need of inquiry here
interested in one
interested in one
in which one ?? ;D
I am interested in a 4x40 display. What color are they? inverted or non inverted?
I am interested in a 4x40 display. What color are they? inverted or non inverted?
Its the 404B, the B stands for STN Yellow/Green
Cool enough I guess I will eventually make a sequencer…
Cool enough
Hehe dito, I plan to build a SID + FM in 1 box and use this LCD for both
Info : This Bulk-Order ends at Wednesday, 30th, April 2008
I’ll be in for a couple of these… Got some of the 2X40 ones before, but haven’t found a suitable inverter circuit for the EL backwire yet.
Getting quite a collection of displays together now.
G
OK, Ive made now a Bulkorder-Page at the Wiki…feel free to add yourself
I was just thinking, you could make a SEQ with just one of these lcds right?
just have 2 rows of tactile switches under neath it, one for the 2nd line and one for the forth.
in which one ?? ;D
Sorry, I didn’t see the second one, but … I guess I am interested in one of each type.
I was just thinking, you could make a SEQ with just one of these lcds right?
just have 2 rows of tactile switches under neath it, one for the 2nd line and one for the forth.
This is taken from uCapps midibox sequencer v3 hardware options:
Which display size?
For MIDIbox SEQ V3, two 2x40 LCDs are required! The menu pages won’t be displayed completely on smaller LCDs, a software solution for 2x16 or 2x20 LCDs is not supported (and very hard to realize)!
A single 4x40 LCD as replacement for the two 2x20 LCDs is possible, but keep in mind, that this requires to arrange the GP buttons and rotary encoders at the top and the bottom of the LCD, so that they are aligned with the 8*5 character segments of the display. Without this alignment, menu item values cannot be edited intuitively.
What does “Registered Parcel” mean? Some kind of tracking number?
What does “Registered Parcel” mean? Some kind of tracking number?
No, no tracking number…“registered” is in german called “Einschreiben”, that means I get a record that Ive bringed the parcel to postoffice, if its get lost, thell pay maximum 25.- Euro back ->http://www.deutschepost.de/dpag?xmlFile=link1015122_3915 (only in german language, sorry)
If you want insuranced parcel with tracking number u must pay minimum 17.- Euro for outside germany, thats so f..cking expensive 
So adding that option is like a micro insurance…
Anyway I was browsing the MidiBox sequencer pages and realized it might get kind of tough to make a good interface with two rows of information. I will ponder it until deadline…
ON a slightly related note, voti has some lcds back in stock,
including this new 128*64 pixel lcd for €14.99:
Hi MTE,
I’m also interessted in 4x40 LCD and 2x16 LCD.
I posted in DokuWIKI what I like to have but now I don’t know what I have to do to pay.
Could you tell me what I have to do?
Thanks,
Housemaster
