BLM 16x16+X PCB and case order [CLOSED/waitlist]

latigid_on · July 17, 2015, 6:25am

Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED
 
latigid on 1 1 1 1 1 1
Rowan 1 1 1 1 1 1
Phatline 2 2 1 2? 1 1
TK 1 1 1 1 1 1
Altitude 1 1 1 1 1 1
rwo 1 1 1 1 1 1
jojjelito 1 1 1 1 1 1
tashikoma 1 1 - 1 - 1  
workspace 1 1 1 1 1 1
flyweight 1 1 1 1 1 1
Grizz 1 1 1 1 1 1
blingy 1 1 - 1 - 1
ganchan 1 1 1 1 ? 1
Macotronic 1 1 - - - - 
 
Total 15 15 10 14 10 13

FYI, you can keep the table tidy by using the code “< >” formatting.

The shift button and M2 hardware are now maxed out. If you’re still interested just put a question mark on these and if it goes over 10 I’ll consider ordering more.

sbm · July 20, 2015, 1:09pm

I’m in as well, looks like on a waiting list possibly, but definitely quantity of 1 each.

Jack · July 20, 2015, 7:12pm

Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED

latigid on 1 1 1 1 1 1
Rowan 1 1 1 1 1 1
Phatline 2 2 1 2? 1 1
TK 1 1 1 1 1 1
Altitude 1 1 1 1 1 1
rwo 1 1 1 1 1 1
jojjelito 1 1 1 1 1 1
tashikoma 1 1 - 1 - 1
workspace 1 1 1 1 1 1
flyweight 1 1 1 1 1 1
Grizz 1 1 1 1 1 1
blingy 1 1 - 1 - 1
ganchan 1 1 1 1 ? 1
Macotronic 1 1 - - - -
Jack 1 1 1 1 1 1

Total 16 16 11 15 11 14

latigid_on · July 21, 2015, 5:43am

Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED
 
latigid on 1 1 1 1 1 1
Rowan 1 1 1 1 1 1
Phatline 2 2 1 2? 1 1
TK 1 1 1 1 1 1
Altitude 1 1 1 1 1 1
rwo 1 1 1 1 1 1
jojjelito 1 1 1 1 1 1
tashikoma 1 1 - 1 - 1  
workspace 1 1 1 1 1 1
flyweight 1 1 1 1 1 1
Grizz 1 1 1 1 1 1
blingy 1 1 - 1 - 1
ganchan 1 1 1 1 ? 1
Macotronic 1 1 - - - - 
sbm 1 1 1 ? ? 1
Jack 1 1 1 ? ? 1
 
Total 17 17 13 14 10 15

tabularasa · July 21, 2015, 6:31pm

Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED

latigid on 1 1 1 1 1 1
Rowan 1 1 1 1 1 1
Phatline 2 2 1 2? 1 1
TK 1 1 1 1 1 1
Altitude 1 1 1 1 1 1
rwo 1 1 1 1 1 1
jojjelito 1 1 1 1 1 1
tashikoma 1 1 - 1 - 1
workspace 1 1 1 1 1 1
flyweight 1 1 1 1 1 1
Grizz 1 1 1 1 1 1
blingy 1 1 - 1 - 1
ganchan 1 1 1 1 ? 1
Macotronic 1 1 - - - -
sbm 1 1 1 ? ? 1
Jack 1 1 1 ? ? 1
tabularasa 1 1 1 ? ? 1

Total 18 18 14 14 10 16

I’m in with one of each.

sonicwarrior · July 21, 2015, 6:45pm

To edit the table quote an entry with it, click on the switch on the upper left. Then you see the source code. Remove the quote so that the one after you is able to quote and add your entry.

Or copy the table without quoting, insert it in the editor, mark it and press on the <> Button.

Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED
 
latigid on 1 1 1 1 1 1
Rowan 1 1 1 1 1 1
Phatline 2 2 1 2? 1 1
TK 1 1 1 1 1 1
Altitude 1 1 1 1 1 1
rwo 1 1 1 1 1 1
jojjelito 1 1 1 1 1 1
tashikoma 1 1 - 1 - 1  
workspace 1 1 1 1 1 1
flyweight 1 1 1 1 1 1
Grizz 1 1 1 1 1 1
blingy 1 1 - 1 - 1
ganchan 1 1 1 1 ? 1
Macotronic 1 1 - - - - 
sbm 1 1 1 ? ? 1
Jack 1 1 1 ? ? 1
tabularasa 1 1 1 ? ? 1
sonicwarrior 1 1 1 ? ? 1
 
Total 19 19 15 14(+4?) 10(+5?) 17

jbdiver · July 22, 2015, 1:30pm

Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED
 
latigid on 1 1 1 1 1 1
Rowan 1 1 1 1 1 1
Phatline 2 2 1 2? 1 1
TK 1 1 1 1 1 1
Altitude 1 1 1 1 1 1
rwo 1 1 1 1 1 1
jojjelito 1 1 1 1 1 1
tashikoma 1 1 - 1 - 1  
workspace 1 1 1 1 1 1
flyweight 1 1 1 1 1 1
Grizz 1 1 1 1 1 1
blingy 1 1 - 1 - 1
ganchan 1 1 1 1 ? 1
Macotronic 1 1 - - - - 
sbm 1 1 1 ? ? 1
Jack 1 1 1 ? ? 1
tabularasa 1 1 1 ? ? 1
sonicwarrior 1 1 1 ? ? 1
jbdiver 1 1 1 1 1 1

Total 20 20 16 15(+4?) 11(+5?) 18

latigid_on · July 22, 2015, 1:57pm

Name PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED
 
latigid on 1 1 1 1 1 1
Rowan 1 1 1 1 1 1
Phatline 2 2 1 2? 1 1
TK 1 1 1 1 1 1
Altitude 1 1 1 1 1 1
rwo 1 1 1 1 1 1
jojjelito 1 1 1 1 1 1
tashikoma 1 1 - 1 - 1  
workspace 1 1 1 1 1 1
flyweight 1 1 1 1 1 1
Grizz 1 1 1 1 1 1
blingy 1 1 - 1 - 1
ganchan 1 1 1 1 ? 1
Macotronic 1 1 - - - - 
sbm 1 1 1 ? ? 1
Jack 1 1 1 ? ? 1
tabularasa 1 1 1 ? ? 1
sonicwarrior 1 1 1 ? ? 1
jbdiver 1 1 1 ? ? 1

Total 20 20 16 14(+5?) 10(+6?) 18

Okay, I will have to CLOSE this order now, mostly because of the shipping effort from my side. All others who are interested can go on a waiting list for the next batch or jump in if people above are too slow to pay etc.

latigid_on · July 22, 2015, 2:00pm

Waitlist PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED
 
latigid on 1 1 1 1 1 1

Total 1 1 1 1 1 1

audax_axon · July 23, 2015, 6:02am

Waitlist PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED

latigid on 1 1 1 1 1 1
audax_axon 1 1 1 ? ? 1
Total 1 1 1 1 1 1

I’m in for the waitlist - interested in this build to pair with my MB6582 and in progress SEQ V4

_FFW · July 23, 2015, 8:23am

Waitlist PCB BLM PCB miniCore Case Shift button M2 hardware 4xLED

latigid on 1 1 1 1 1 1
audax_axon 1 1 1 ? ? 1
ffw 1 1 1 1 1 1
Total 3 3 3 2 2 3

latigid_on · August 2, 2015, 6:05pm

Okay, I’ve sent out PMs to request addresses etc. I’m looking to get the PCB finalised, then I will start to request payments.

Best,

Andy

Altitude · August 2, 2015, 6:15pm

Is the pricing in the OP still correct?

sonicwarrior · August 2, 2015, 6:32pm

So your location is Switzerland? Because that would mean the involvement of the customs office.

latigid_on · August 2, 2015, 8:48pm

Is the pricing in the OP still correct?

Cases are $270 due to the modifications mentioned. Postage a little cheaper. 18 button pads are $79 from Mouser.

So your location is Switzerland? Because that would mean the involvement of the customs office.

I will post when next travelling to the EU for cheaper shipping, unless you prefer otherwise

latigid_on · August 5, 2015, 4:57am

Dear all, many thanks for the PM responses so far. I am currently waiting on info from grizz , ganchan , blingy , and sonicwarrior. The PCBs are basically finalised, I will order the batch and build another, then commit to buying cases. If I can get payments reasonably quickly you might get your boards in 4-6 weeks or so.

latigid_on · August 8, 2015, 9:40am

Hello,

I have sent out the PayPal invoices, many thanks for those that have paid already. I just have to make the PCB gerbers and they’ll be on the way.

I figured it would be best to open a USD account to make things easier, so I will get that set up and send out bank payment details early next week.

Just a note on the cases: I realise that $270 seems expensive, so I thought it might be interesting to see what it would cost at FPE.

A 330x330 mm square panel in 3 mm aluminium with the 289 holes, 5 M2 threaded holes, slots and milling for the sliders, and 20 M3 blind studs comes to a single price of $322.03 (with discounts depending on quantity). Remember that the case I specified includes bends which really helps with the stability, cutouts for the DIN connector, the second U-shape piece with rubber feet, powdercoating for longevity and worldwide shipping (with luck VAT free).

The pricing is also based on the quantities requested so far, which I’m basically ordering at cost. I’d say “trust me” and pick up a case with this bulk order as I probably won’t be able to offer this pricing again unless there was similar interest. I could try to anticipate the total numbers, but this would be at my own risk. Worst case I would take the extras and possibly build them for sale or offer them in kit form for latecomers, but here you would lose the free shipping option.

Anyway, it’s of course up to you whether you want a case or not (most people have). I also need to enlist a few more sign ups as a few have asked to move to the waitlist.

sonicwarrior · August 8, 2015, 12:20pm

I’m afraid I don’t have the money for it this month as I got some unexpected bills to pay.

latigid_on · August 8, 2015, 1:03pm

Hello,

Hmm, sorry about your circumstances. I have to see if there’s sufficient interest from the waitlist, otherwise I might have to refund the already collected PayPal payments or adjust the pricing. It might be an option to just order the PCBs for now and do a run of cases later.

Altitude · August 8, 2015, 1:37pm

Are you canceling invoices?