BankStick copying, cloning and imaging

Design Concepts
1

  1. I want to setup BankStick Bank 1 how I like and then ‘copy’ Bank 1 to Bank 2 to use it as a template to make some alterations to … then copy Bank 1 to Bank 3 and tweak that etc … is this possible?

  2. If I have a BankStick how can I make a backup of it - a complete clone?

  3. When using the BankStick how can I get the button/fader settings etc into the MBox so that when I pull the BankStick out the controller stays with the ‘image’ of the Bank I was just using?

Pete

2

Hi Peter,

you could make a backup of the data of a bank by saving the data to sysex file with vsysexbox.

A feature to dowload all banks with one mouseclick is planned but not yet available.

Regards,

Serge

3

I knew that we could do a SYSEX as a way to solve #2 - but I still need to;

  1. ‘copy’ from Bank to Bank

  2. have the ‘image’ of the bank being used stay with the MBox when I remove the Bankstick

… all while I have it running standalone …

Pete

4

Since I also need this possibility sometimes, when I want to duplicate the stored pot setups, it’s on the ToDo List now.

Best Regards, Thorsten.