This is my first post , so if it’s in the wrong place etc… I hope you will all forgive.
I am building a small pipe organ, (demonstration can be seen on http://mechorgbuild.blogspot.com/) . To control this, I have built the pic burner, core module and a two Dout 32 modules with Uln driver chips to control the solenoids below the pipes. This works quite successfully and the notes have been assigned to the pins using mplab and the preset inc.file. The problem now is to assign different channels to some pins. I don’t have much experience in programming and I can’t find the way to do this. Can anybody help me please?
Thank you for the link Michael, I’ll go and have a look. Following Thorsten’s advice, I now have the Dout module working well on any notes and channels I choose. Tonight, I’ve just finished making the 32 note Din module. (More ferric chloride stains everywhere !!). It works fine but I get some odd results when I try to show the input to the core on the Dout module. Time for bed now so it will have to wait until later today.