# Aout with max5500

**URL:** <https://forum.midibox.org/t/aout-with-max5500/46725>\
**Category:** General\
**Created:** [September 13, 2026, 5:16pm UTC](https://forum.midibox.org/t/aout-with-max5500/46725 "2026-09-13T17:16:28Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![forestcaver](https://forum.midibox.org/letter_avatar_proxy/v4/letter/f/d6d6ee/32.png) [@forestcaver](https://forum.midibox.org/u/forestcaver)\
**Post date:** [September 13, 2026, 5:16pm UTC](https://forum.midibox.org/t/aout-with-max5500/46725/1 "2026-09-13T17:16:28Z")

</div>

Here’s another aout with two max5500 ics. All works well. Less than 1mV error between -5V and +5V at each whole integer voltage (without needing to use the piece wise interpolation calibration routines). I also made a breakout pcb for the dout and aout (40 jacks)

 ![IMG_2988](https://forum.midibox.org/uploads/default/original/3X/9/4/9417ecdefd9b6c41747cb8f1ec11871787c25f9b.jpeg)

---

<div class="post-metadata">

**Author:** ![6040](https://forum.midibox.org/letter_avatar_proxy/v4/letter/6/a4c791/32.png) [@6040](https://forum.midibox.org/u/6040)\
**Post date:** [September 17, 2026, 7:00am UTC](https://forum.midibox.org/t/aout-with-max5500/46725/2 "2026-09-17T07:00:57Z")

</div>

Looks very interesting.

Was everything soldered by the manufacturer or did you have to do some smd stuff yourself? If I recall you were not happy with the AOUT\_NG, so I assume this works better.

How much is it to get this made? Do you still have spare ones you are willing to sell?

cheers

6040

---

<div class="post-metadata">

**Author:** ![forestcaver](https://forum.midibox.org/letter_avatar_proxy/v4/letter/f/d6d6ee/32.png) [@forestcaver](https://forum.midibox.org/u/forestcaver)\
**Post date:** [September 17, 2026, 4:04pm UTC](https://forum.midibox.org/t/aout-with-max5500/46725/3 "2026-09-17T16:04:18Z")

</div>

Thanks !

- Most of the SMT parts were placed at the factory (I was feeling lazy was busy with work and had a lot of projects on the go so ordered a few of the projects as part PCBA…). I did solder the DACs by hand…
- Re: the aout\_ng - yeah, had a few issues with it - the bipolar option has an error - it uses non-inverting opamp summing but specifies incorrect resistors for this; in the unipolar configuration you can’t trim the offset out so you may have a pretty decent sized offset of the 0V output ! As I needed a few, I decided just to make my own.
- I used opa4171 opamps for lower offset etc
- The MAX5500 is a _lot_ cheaper than the MAX525 btw !
- I just checked - it cost me $82 (USD) for five assembled pcbs (apart from thru-hole parts and the DACs) to have made in China. The tax/duty and shipping to the UK were on top of this - not sure how much that was - call it maybe $20+ per (mostly) assembled pcb ?
- I also made a breakout pcb with 40 jacks to use with multiple aouts or in combination with a dout
- I also made a 19” 2u panel to mount power, switch, usb, sd card, ethernet, iic quad midi, 4 midi in and 4 midi out ports…
- Bit unsure if I have any spare - I have built four and have one pcb spare but am thinking of stacking a few to have loads of outputs so am reluctant to part with any spares at the moment- sorry !

 ![1138-modular_seqv4](https://forum.midibox.org/uploads/default/original/3X/6/6/6690bfb4dd8e5d0d6e92cd6df9abc5d782e73a99.jpeg)

 ![1139-modular_seqv4](https://forum.midibox.org/uploads/default/original/3X/6/2/6272a22192046ee3006caeb8e1b4e774e99712ad.jpeg)

 ![1063-modular_seqv4_crop](https://forum.midibox.org/uploads/default/original/3X/5/6/56261d0ae1ec63b63639e256f17abebc7e11e041.jpeg)

---

<div class="post-metadata">

**Author:** ![6040](https://forum.midibox.org/letter_avatar_proxy/v4/letter/6/a4c791/32.png) [@6040](https://forum.midibox.org/u/6040)\
**Post date:** [September 18, 2026, 7:15am UTC](https://forum.midibox.org/t/aout-with-max5500/46725/4 "2026-09-18T07:15:14Z")

</div>

Wow what an awesome setup.

What kind of music does come out of that? I would love to hear some tracks.

Would you mind sharing your gerber files and the BOM?

cheers

6040

---

<div class="post-metadata">

**Author:** ![forestcaver](https://forum.midibox.org/letter_avatar_proxy/v4/letter/f/d6d6ee/32.png) [@forestcaver](https://forum.midibox.org/u/forestcaver)\
**Post date:** [September 18, 2026, 7:04pm UTC](https://forum.midibox.org/t/aout-with-max5500/46725/5 "2026-09-18T19:04:43Z")

</div>

Thanks.

Music - mostly ambient or techno (!) Or layered with guitars… I have some stuff on soundcloud from a few years ago but it’s not great !

Yeah - more than happy to share files - what do you want ? (May take a few days - I’m in the process of moving from Eagle, which has just stopped access, to kicad - so am trying to double check that the projects are intact !)

---

<div class="post-metadata">

**Author:** ![6040](https://forum.midibox.org/letter_avatar_proxy/v4/letter/6/a4c791/32.png) [@6040](https://forum.midibox.org/u/6040)\
**Post date:** [September 19, 2026, 10:37am UTC](https://forum.midibox.org/t/aout-with-max5500/46725/6 "2026-09-19T10:37:46Z")

</div>

I really liked Amorphous Metal and This Night if they are yours!

Regarding the pcbs I would be happy with just the zipped gerbers, cpl and bom you uploaded to the manufacturer. While I can solder okish I would not know how to design a pcb.

No rush and have a great weekend

---

<div class="post-metadata">

**Author:** ![forestcaver](https://forum.midibox.org/letter_avatar_proxy/v4/letter/f/d6d6ee/32.png) [@forestcaver](https://forum.midibox.org/u/forestcaver)\
**Post date:** [September 20, 2026, 9:05pm UTC](https://forum.midibox.org/t/aout-with-max5500/46725/7 "2026-09-20T21:05:25Z")

</div>

Thanks a lot ! That’s really kind - yes, they are mine.

I have made some minor changes to the pcb to remove some unused parts - will export some gerbers and send them to you this week !

---

<div class="post-metadata">

**Author:** ![6040](https://forum.midibox.org/letter_avatar_proxy/v4/letter/6/a4c791/32.png) [@6040](https://forum.midibox.org/u/6040)\
**Post date:** [October 16, 2026, 9:57am UTC](https://forum.midibox.org/t/aout-with-max5500/46725/8 "2026-10-16T09:57:40Z")

</div>

Hi forestcaver, did you get a chance to finish the gerbers?

---

<div class="post-metadata">

**Author:** ![forestcaver](https://forum.midibox.org/letter_avatar_proxy/v4/letter/f/d6d6ee/32.png) [@forestcaver](https://forum.midibox.org/u/forestcaver)\
**Post date:** [October 16, 2026, 9:25pm UTC](https://forum.midibox.org/t/aout-with-max5500/46725/9 "2026-10-16T21:25:49Z")

</div>

Hi - check your PMs !! (I sent you all the design files and gerbers a while ago !) 🙂
