Any interest in ALBS jog shuttles? (- CLOSED -)

Bulk Orders
1

Hi everyone,

I’m thinking of putting an order together for some ALBS #401907 SRGPVJ0100 Jog Shuttles to use for the MBSeq datawheel. The minimum order would be 6 shuttles at 5,50 EUR (£4.34) each, so if another 5 people are interested in a jog shuttle, I’ll go ahead with it.

Let me know if there’s any interest.

Thanks  :slight_smile:

2

That part is only a “shuttle” and not a “jog”… i.e. it only has limited range like a potentiometer and not the same as a rotary encoder (which is what you need for the MB-SEQ datawheel).

3

Oops, sorry, I got the wrong part.  ::slight_smile:

This is what I meant - it is actually the JOG wheel (the knob that goes on top), not an encoder.

#866003 DK38-144 A.6

I just wanted to put this order together as it seems very difficult to find these jogs anywhere individually.

Minimum order comes up to 16 units at 2.23EUR (£1.78) each.

Anyone interested?

4

I’d be interested in 4.

5

smaudio,

where are you located, what additional costs would be incurred? I might be interested in 3 of those.

Best regards, ilmenator

6

Hi smaudio,

I would take 4 if the shipping cost won’t be high,

Best regards, Asaf

7

Conrad has the ALPS equivalent of those (#715751 - 62)

Prices in €:

Quantity Price    Rebate

1    1,22  –

10      1,12   8% = 0,10

100   1,02 16% = 0,20

8

The Conrad ones are cheaper but slightly larger (45mm in diameter). The DK38-144 fit nicely on a 1U 19" front panel, they are only 38mm in diameter.

9

Glad to have people on board with this  :slight_smile:

I’m located in London UK.

Additional charges would only be PayPal (£0.3 + 3.6% per order) and postage to country of delivery. I’ve already included VAT in the price.

For UK signed for (3-5 working days)<250g:  £3.31

For international airmail (3-5 working days) <120g parcel:

Europe: £4.86

World: £5.14

If your parcel weighs less or more I’ll invoice you for the equivalent amount, I don’t know exactly how much parcels will weight at the moment.

I’ve added the “international signed for†option, which provides proof of receipt. If you wish to opt out, you can take out £3.50 (£1.86 for UK) of the shipping costs, but I can’t hold responsibility if the parcels get lost in the post. Also, if you’d prefer surface mail that would take up to 2-5 weeks, please let me know and I’ll calculate the fees for you, however airmail would be preferable to keep things moving faster.

Payment in GBP please with Paypal.

The initial order will be for 16 but if I get enough interest I might order a few more.

I’ll let you know once the order has been put through to get the details from anyone that’s expressed interest.

10

What about international bank transfer using IBAN and SWIFT codes? I hate supporting Paypal…

Best regards, ilmenator

11

Hi ilmenator,

Yeah, IBAN/SWIFT codes bank transfers should be fine too.

Best Regards

12

Oops, sorry, I got the wrong part.  ::slight_smile:

This is what I meant - it is actually the JOG wheel (the knob that goes on top), not an encoder.

#866003 DK38-144 A.6

Ahh… I already have four of these knobs, which should work well as the datawheel knob on the MB-SEQ control surface I’m building.

FYI these knobs should work well with a 3mm panel, 10mm PCB/panel gap and “panel mounting” the encoder to the PCB, like what I talked about here: http://www.midibox.org/forum/index.php/topic,11189.msg87646.html (I just forgot to mention this knob suited the other dimensions).

13

I’m interested in two of these…

They fit the rotary encoders sold by SmashTv?

14

hi matyt,

Have just asked Albs about the shaft and their reply was:“the knob is made to fit a 6mm flat shaft 6/4,5mm and not a 6mm round shaft”.

I take that to mean 6mm shafts that are flat at the end, which is what SmashTV’s encoders (alps EC12E) are like. Please anyone if you think I’m getting this wrong let me know! (I’m buying these for SmashTV’s encoders too) :slight_smile:

15

Yes, these will fit the smash encoders.

The shafts are 6mm round, with a milled face for metric D knobs,  such as these wheels.

I’m in for 10. If that’s ok.

16

Ok guys cool, I think I’ll go ahead with the order asap.

Here’s everyone I’ve got down so far:

Reincarnate: x4

Ilmenator: x3 (tbc)

asafnetzer: x4 (tbc)

matyt: x2

tilted: x10

Imenator and asafnetzer, let me know if you’re still interested as I’m hoping to put the order through tomorrow if possible(!)  ;D

17

If it’s not too late, I would like to buy 3

Thanks

18

I’m in, thanks

19

Yes, confirmed!

Best regards, ilmenator

20

Cool,

Prof, I’m counting you in.

Ok, I’ll make the order and confirm with you when it’s done  :slight_smile: