# Another SEQ V4 build **URL:** \ **Category:** MIDIbox Gallery\ **Tags:** mbseqv4, seqv4\ **Created:** [March 24, 2026, 9:53pm UTC](https://forum.midibox.org/t/another-seq-v4-build/46660 "2026-03-24T21:53:16Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![thoralt](https://forum.midibox.org/letter_avatar_proxy/v4/letter/t/dfb087/32.png) [@thoralt](https://forum.midibox.org/u/thoralt)\ **Post date:** [March 24, 2026, 9:53pm UTC](https://forum.midibox.org/t/another-seq-v4-build/46660/1 "2026-03-24T21:53:16Z")
I know, I’m late to the party. I wish I would have known the Midibox project ten years earlier, but here we are. This is my build log. 🙂 I decided to build a SEQ V4 with Wilba’s front panel. Getting the parts and PCBs was a bit tricky, especially since the front panel PCB can only be sourced from the U. S. which took several weeks. First light: ![First light](https://forum.midibox.org/uploads/default/original/3X/1/f/1f785989c7ba43f4e074f62f2858c16487ed30ed.jpeg) The front panel would be one of the most expensive components - 244 € was simply too much for me, so I opted for a DIY version. I used my CNC mill for engraving the letters and symbols which turned out quite nicely. Front panel proof of concept: ![Front panel test fit](https://forum.midibox.org/uploads/default/original/3X/2/b/2b5ed0afe4acf6bc5568d83b21352fc3e1ab5c20.jpeg) Milling the front panel: ![Milling the front panel](https://forum.midibox.org/uploads/default/original/3X/0/6/063bdac4a9506bbcd24ad854be474c6a1597f4e9.jpeg) There’s still a lot of work to be done. I’ll keep you posted. 😉 ---
**Author:** ![Hawkeye](https://forum.midibox.org/user_avatar/forum.midibox.org/hawkeye/32/223_2.png) [@Hawkeye](https://forum.midibox.org/u/Hawkeye)\ **Post date:** [March 25, 2026, 9:51am UTC](https://forum.midibox.org/t/another-seq-v4-build/46660/2 "2026-03-25T09:51:27Z")
@thoralt great work and perfect use of the CNC! Enjoy building and best regards! Peter