# Analog Automation

**URL:** <https://forum.midibox.org/t/analog-automation/16456>\
**Category:** MIDIbox HUIs\
**Created:** [April 20, 2012, 8:07pm UTC](https://forum.midibox.org/t/analog-automation/16456 "2012-04-20T20:07:10Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![cntlr](https://forum.midibox.org/letter_avatar_proxy/v4/letter/c/51bf81/32.png) [@cntlr](https://forum.midibox.org/u/cntlr)\
**Post date:** [April 20, 2012, 8:07pm UTC](https://forum.midibox.org/t/analog-automation/16456/1 "2012-04-20T20:07:10Z")

</div>

I would like to build a flying fader clone for my Tascam M1600 analog board, sync to smpte like the big boys. What mods would I need? Its been a while since I have built anything but like a bike I am sure it will come back to me. Any info would be helpful.

Thanks

---

<div class="post-metadata">

**Author:** ![ilmenator](https://forum.midibox.org/user_avatar/forum.midibox.org/ilmenator/32/10_2.png) [@ilmenator](https://forum.midibox.org/u/ilmenator)\
**Post date:** [April 20, 2012, 8:35pm UTC](https://forum.midibox.org/t/analog-automation/16456/2 "2012-04-20T20:35:39Z")

</div>

Hi, and welcome here!

Go through the “MB Hardware Platform” section over at [ucapps.de](http://www.ucapps.de/) and take a look at the modules that are available. That might give you some ideas of what is possible with this platform.

Best, ilmenator

---

<div class="post-metadata">

**Author:** ![cntlr](https://forum.midibox.org/letter_avatar_proxy/v4/letter/c/51bf81/32.png) [@cntlr](https://forum.midibox.org/u/cntlr)\
**Post date:** [April 20, 2012, 11:16pm UTC](https://forum.midibox.org/t/analog-automation/16456/3 "2012-04-20T23:16:28Z")

</div>

I have been looking at that, near as I can tell I need the core & the LC mods to start. I have a lot of research ahead of me. Thanks for the input!