Added some encoders to dial through waveforms etc. only works with env-layer

jrp · March 30, 2014, 10:58pm

I edited (deleated) an old thread with no answers since i was able to answer myself and i donÂ´t want to open too many new threads…

Midibox sid has a great fascination on me.

After toying with the cs for some time i have come to realize that i want to implement some changes.

Already re-arranged some menues and was able to find out how to edit the CS_MENU_ENC_TABLE.inc so that the controllers will point to the right (new) menu entries. This was useful especially for renaming entries but also re-arranging the envelope to my taste. AD2SR with D1min and DLev max. Classic ADSR

Then i found out that i can implement new encoders by adding lines to CS_MENU_ENC_TABLE.inc and the SETUP_6581.asm

All trial and error, i never learned programming. I was very surprised that it sort of works. Really got me excited:-)

I can now define a encoder to dial (up and down) through

OSC select

OSC Wave

LFO select

LFO wave

Filter source (osc)

Filter Type (lp,bp,etc)

Like the feel better than using the buttons from the original cs (maybe also couse the cheap buttons from pollin are trash).

Also i included two more encoders:

Edit menue item #6

Edit AOut ch 7 (overdrive in my sid)

LFO select and wave always work, the others only work if env ctrl is set to env.

When set to assign layer my new additions donÂ´t work as expected, they seem to controll all sorts of stuff then. release, menu item 2, menu item 1, resonance…

If it was the other way around i could live with it, always working in ENV-Ctrl set to assign, since my env menue represents the 5 encoders anyhow…

So somehow my entries are affected by the env ctrl button.

I know my code is not as it should be, i was getting allerts while compiling.

column 1 pointing to makro, something like that.

Also the CS_MENU_ENC_TABLE.inc says in the beginning that CS_MENU_ENC.inc has to be configured as well.

No idea how.

Here is my code added to CS_MENU_ENC_TABLE.inc

    ;; LFO section
   ;;       menu       offset   cursor pos
   CSENC_ENTRY   CS_MENU_L_LFO,   0x02,   0x02   ; Rate
   CSENC_ENTRY   CS_MENU_L_LFO,   0x02,   0x04   ; Depth

;;;;;;;___New Lines:

CSENC_ENTRY CS_MENU_L_LFO, 0x00, 0x00 ; lfo select
CSENC_ENTRY CS_MENU_L_LFO, 0x00, 0x01 ; wave

CSENC_ENTRY CS_MENU_L_OSC, 0x00, 0x01 ; osc wave
CSENC_ENTRY CS_MENU_L_OSC, 0x00, 0x00 ; osc select

    CSENC_ENTRY   CS_MENU_L_FIL,   0x00,   0x01   ; osc-filter select
   CSENC_ENTRY   CS_MENU_L_FIL,   0x00,   0x04   ; filter type

    CSENC_ENTRY   0xff,       0x05,   0x00   ; Menu item #6
    CSENC_ENTRY   CS_MENU_L_EXT,   0x00,   0x06   ; aout7

My entries in the setup.asm:

    ENC_ENTRY 6, 6, MIOS_ENC_MODE_DETENTED3   ; LFO rate 2,6
   ENC_ENTRY 6, 4, MIOS_ENC_MODE_DETENTED3   ; LFO depth 1,4
ENC_ENTRY 5, 6, MIOS_ENC_MODE_DETENTED3   ; LFO select
ENC_ENTRY 5, 4, MIOS_ENC_MODE_DETENTED3   ; LFO wave
ENC_ENTRY 2, 6, MIOS_ENC_MODE_DETENTED3   ; osc wave
ENC_ENTRY 1, 4, MIOS_ENC_MODE_DETENTED3   ; osc select
ENC_ENTRY 3, 6, MIOS_ENC_MODE_DETENTED3   ; osd-filter select
ENC_ENTRY 3, 4, MIOS_ENC_MODE_DETENTED3   ; filter type
ENC_ENTRY 5, 2, MIOS_ENC_MODE_DETENTED3   ; menu 6
ENC_ENTRY 5, 0, MIOS_ENC_MODE_DETENTED3   ; analog out 7

ENC_ENTRY 0, 6, MIOS_ENC_MODE_DETENTED3 ; Filter CutOff

jrp · April 4, 2014, 9:40pm

when i place everything on the end of the list, not inbetween LFO and Filter, it works with ENV-Ctrl set to assign. While in the env layer it doesnÂ´t.

I could actually live with that, assign layer is great and if i tap on the env_select button i got my Depth, A D2 S R as the first 5 items on the screen anyhow.

Being a code noob i would propably replace the env_ctrl button with an rc network to set the pin high just after loading. It will set Ctrl to Assign after power on.

But hey, maybe i could learn how to add some controlls the way itÂ´s supposed to be done. Without messing stuff up…